TEN 8-2411WI TRACOPOWER, TEN 8-2411WI Datasheet - Page 3

• Manufacturer Part Number: TEN 8-2411WI
• Description: DC/DC Converter
• Manufacturer: TRACOPOWER

Specifications of TEN 8-2411WI

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 9V To 36V
• Power Rating: 8W
• Output Voltage: 5V
• Output Current: 1.5A
• Approval Bodies: CUL, EN, IEC, UL
• Supply Voltage: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Application notes can be downloaded under:
www.tracopower.com/products/ten8wi_application.pdf
Note 1:
In order to meet conducted emissions EN55022-A an aluminium electrolytic capacitor (low ESR) has to be installed between +Vin and
-Vin. The capacitor should be capable to handle 0.5A ripple current.
Output Specifications
Isolation voltage (60 sec)
Isolation resistance
Isolation capacity
Switching frequency
Vibration
Safety standards
Safety approvals
Remote On/Off
General Specifications
Power Derating
100
80
60
40
20
0
-40
-20
0
Amb ient Temper atu re [°C]
20
– Input / Output
– Input / Output
– Input / Output
– On:
– Off:
– Off idle current:
40
60
80
100
Natural convection
Forced cooling with 500 LFM
1‘500 VDC
>1‘000 M Ohm
300 pF max.
300 kHz typ. (pulse width modulation PWM)
10-55Hz, 10G, 30 minutes along X,Y,Z
UL/cUL 60950-1, IEC/EN 60950-1
UL/cUL File tba
3.5 ... 12 VDC or open circuit
0 ... 1.2 VDC or short circuit pin 1 and pin 2/3
2.5 mA
DC/DC Converters
TEN 8WI Series
Page 3 of 4
8 Watt