PSU, SWITCH MODE, 48V, 14.4W

CDU-L-3-35-DMX

Manufacturer Part NumberCDU-L-3-35-DMX
DescriptionPSU, SWITCH MODE, 48V, 14.4W
ManufacturerLUMIDRIVES
CDU-L-3-35-DMX datasheet
 


Specifications of CDU-L-3-35-DMX

Power Supply Output TypeVariablePower Rating54W
Input Voltage110V AC To 240V ACOutput Voltage48V
Output Current350mAOutput Power Min4.8W
Output Current 10.35ASupply Voltage Max265VAC
Output Power14.4WSupply Voltage Min195VAC
Rohs CompliantYesNo. Of Outputs3
Operating Temperature Max40°CLead Free Status / RoHS StatusLead free / RoHS Compliant
1
Page 1
2
Page 2
Page 1/2

Download datasheet (232Kb)Embed
Next
COLOR DRIVER 36
WITH DMX CONTROL CAPABILITY
OPERATING CONDITIONS
Operating Ambient temperature -10ºC to +40ºC
(14ºF to 104ºF)
Maximum case temperature 65ºC (149ºF)
Input voltage 110-240 VAC / 50-60 Hz
Power consumption, 6-54W
Power factor = 0.95
Output current = 350mA at 100%
Dimming control = DMX512 or
pre-programmed color changing sequence
505 addresses possible per system
V
:4.8 - 48 VDC
out
MECHANICAL DIMENSIONS
310mm X 55mm X 45mm
(12.20” x 2.17” x 1.77”)
2 Mounting slots for M3 screws
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
FEATURES / BENEFITS
3 fully addressable constant current outputs to
separately control and drive red, blue and green
LED circuits, making infinite combinations of
colors possible
Drives up to 12 LEDs per channel, 36 total
Digital dimming level from 0% to 100%
On board DMX compliant control interface
Dip switch programmable for DMX channel or
standard color-changing program
Short and open circuit protected
Remote mountable up to 30 meters (95’)
Available Color Kinetics pass through license,
consult factory for details
APPLICATION
Appropriate driver for any Dialight-Lumidrives
color engine or RGB LinkLED system.
Dynamic RGB color mixing
Decorative lighting
Entertainment lighting
Theme lighting
CONTROL/INTERFACE
DMX input via RJ45 connector
Dip switch programmable for DMX channel
or standard color-changing program
For standard color changing sequence, set dip
switches to channel 511
PART NUMBER
CDU-L-3-35-DMX
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
MDEXLUMCD36DMX_C

CDU-L-3-35-DMX Summary of contents

  • Page 1

    ... DMX input via RJ45 connector Dip switch programmable for DMX channel or standard color-changing program For standard color changing sequence, set dip switches to channel 511 PART NUMBER CDU-L-3-35-DMX Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA MDEXLUMCD36DMX_C ...

  • Page 2

    CDL-M3E is equipped with 8 individual colored wires. Each wire to be soldered onto indicated solder pad on Dialight reserves the right to make changes at any time in order to supply the best product possible. COLORDRIVER 36 WITH DMX ...