SMART1050SLTAA Tripp Lite, SMART1050SLTAA Datasheet - Page 3

• Manufacturer Part Number: SMART1050SLTAA
• Description: GSA/TAA-Compliant 1050VA UPS
• Manufacturer: Tripp Lite

Specifications of SMART1050SLTAA

• Capacity (va / W): 1050VA / 650W
• No. Of Outlets: 8
• Input Voltage: 95V AC To 145V AC
• Supply Voltage Typ: 120 VAC
• Output Voltage: 120V
• Backup Time - Full Load: 7min
• Length: 335.28mm
• Width: 172.72mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Rated input current (at
maximum load)
Nominal Input Voltage(s)
Supported
UPS input connection
type
UPS Input cord length (ft.)
UPS Input cord length (m)
Recommended Electrical
Service
BATTERY
Full load runtime
(minutes)
Half load runtime
(minutes)
DC system voltage (VDC)
Battery recharge rate
(included batteries)
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery replacement
description
VOLTAGE REGULATION
Voltage regulation
description
Overvoltage correction
Undervoltage correction
LEDS ALARMS & SWITCHES
LED Indicators
Site wiring fault indication
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
UPS AC suppression
response time
UPS Dataline suppression
6.1A (120V), 6.6A (110V), 7.2A (100V)
100V AC; 110V AC; 120V AC
5-15P
6
1.8
15A 120V
7 min. (650w)
19 min. (325w)
24
Less than 6 hours from 10% to 90%
RBC24-SLT
Battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 95 to 145
(120v), 87 to 133 (110v), 83 to 121 (100v)
Voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v)
Voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v)
9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter
for load and battery charge level
Rear panel site wiring fault LED
Audible alarm indicates power failure and overload conditions
Power-fail alarm can be silenced using alarm-cancel switch
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support nominal voltage selection
690
Instantaneous
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet