2424XG1.0 VISUALUX, 2424XG1.0 Datasheet - Page 5

• Manufacturer Part Number: 2424XG1.0
• Description: FILTER, 105X35MM, LIGHT RED
• Manufacturer: VISUALUX

Specifications of 2424XG1.0

• Colour: Light Red
• External Depth: 1mm
• External Length / Height: 105mm
• External Width: 35mm
• Lead Free Status / RoHS Status: na

V
SA-Series
This series of Visualux Backlights has been designed for applications that require all the benefits of the Visualux
technology but at the lowest possible price. SA-Series Backlights are supplied as two separate unassembled
components , e.g.
Visualux Backlights and the cast acrylic light guide is of the same design as the E-Series which utilised the
reflective properties of the light guides precision machined edge but without the machined ledge for the
emitters.
PCB Modules
The PCB modules are either S,E or SA Series Backlights mounted on to a single sided or PTH circuit board. Apart
from the Backlight we are able to mount resistors and other devices that may be required. The major advantage
of this system is that only two leads are needed to be terminated.
S-Series
isualux Backlights were primarily designed for use with transflective and transmissive LCDs but are being
used in a number of other areas that include status warning indicators and low power, long life, lighting
systems. All Visualux Backlights are supplied, unless otherwise requested, as an S-Series style backlight.
Below are descriptions of the standard options that are available.
LED
Visualux Ltd Tel: [phone] Fax: [phone] E-Mail: [e-mail]
emitter and light guide. The
Visualux
The ultimate Backlight, designed for applications where maximum
light output efficiency is the primary concern. Visualux Backlights
use custom designed
acrylic light guide. The S-Series uses ultra white secondary
reflectors, located on the vertical edges, to reflect light down to the
primary reflector that is located below the viewing area (fig.2).
use ultra white spray coatings for our primary and secondary
reflectors, unlike our competitors who use a white adhesive tape
which can easily delaminate.
utilise all available emitted light and this results in a very low light
loss factor.
E-Series
The E-Series Visualux Backlight is manufactured to the same high
standards as the S-Series but has been designed for applications
where cost effectiveness is of more importance than light output
efficiency. Instead of ultra white secondary reflectors, the E-Series
uses the reflective properties of a precision machined edge.
(edge lit)
LED
emitter is the same type as used in the S and E Series
Backlights
LED
emitters (fig.1) to ‘fire’ light into a cast
The S-Series has been designed to
Page 4
LED
We