K50LGRYPQ BANNER ENGINEERING, K50LGRYPQ Datasheet - Page 2

• Manufacturer Part Number: K50LGRYPQ
• Description: Programmable Indicator Light
• Manufacturer: BANNER ENGINEERING
• Type: LEDr

Specifications of K50LGRYPQ

• Mounting Hole Dia: 30mm
• Led Color: Red / Yellow / Green
• Forward Current / Color: 40mA
• Power Connection Type: Terminal
• Supply Voltage: 30V
• Supply Voltage Max: 30VDC
• Current Rating: 40mA
• Connection: 4-Pin Euro QD
• Input: PNP
• Led Function: 3 Color: Green, Red, Yellow
• Lens Color: Multicolor
• Lens Style: Dome
• Mounting Size: 50 mm
• Primary Type: Pilot Light
• Termination: Quick Connect
• Voltage, Supply: 18-30 VDC
• Multi-color And/or Flashing Frequencies: Three, Four or Five Color Models
• Accessories Available: Cordsets, Brackets and Mounting Solutions
• Color: Multicolor
• Light Functions: Red, Green, Yellow Light
• Mounting Type: 30mm Barrel

Supply Voltage and Current
Indicators
Environmental Rating
EZ-LIGHT
2
** Contact Factory for other colors/color combinations, including: blue, white, orange.
T8 Models: 10 to 30V dc @ 20 mA max. per LED color
K30L, T18 and M18 Models: 10 to 30V dc @ 25 mA max. per LED color
T30 Models: 10 to 30V dc @ 40 mA max. per LED color
K50L, K50FL and K80L Models: 18 to 30V dc @ 40 mA max. per LED color
Entire translucent diffuser or dome provides indication.
LEDs are independently selected: Green, Red, Yellow; 1, 2, or 3 colors,
depending on model. For other colors/combinations, contact Factory for
availability.
IEC IP67
T8L not encapsulated; K80L has encapsulated electronics only; other models fully
encapsulated.
K50, K50L, and K50FL QD Models meet IP69K per DIN 40050-9. Cabled models also
meet IP69K if the cable and cable entrance are protected from high-pressure spray.
* T8L Models: Standard pigtail QD models are listed (mating cable required; see page 3). For integral 4-wire 2 m (6.5') cable model, omit suffix “QP” (e.g., “T8LGRXP”).
Other Models: Standard 4-pin Euro integral QD connector models are listed (mating cable required; see page 3). For 2 m (6.5') integral 4-wire cable model, omit suffix “Q”
K80L Models: Standard 4-pin Euro integral QD connector models are listed (mating cable required; see page 3). For terminal-wired model, omit suffix “Q” (e.g., “K80LGRXP”).
P/N 121899 rev. G
(e.g., “M18GRXP”). For 150 mm (6") PVC pigtail with 4-pin Euro connector, replace suffix “Q” with “QP” (e.g., “M18GRXPQP”).
Models
™ – General-Purpose Indicators with Two or Three Colors
M18GRYPQ
M18GRYNQ
T18GRYPQ
T18GRYNQ
T30GRYPQ
T30GRYNQ
K30LGRYPQ
K30LGRYNQ
K50LGRYPQ
K50LGRYNQ
K50FLGRYPQ
K50FLGRYNQ
K80LGRYPQ
K80LGRYNQ
Nickel-plated brass housing,
thermoplastic diffuser.
Fully encapsulated
IP67
Thermoplastic polyester
housing, thermoplastic diffuser.
Fully encapsulated
IP67
22 mm threaded polycarbonate
base, translucent polycarbonate
dome.
Fully encapsulated
IP67, IP69K
30 mm threaded polycarbonate
base, translucent polycarbonate
dome.
Fully encapsulated
IP67, IP69K
Polycarbonate base,
translucent polycarbonate
dome.
Fully encapsulated
IP67, IP69K
ABS and polycarbonate base,
translucent polycarbonate
dome.
Electronics fully encapsulated
IP67
Construction
Specifications
4-pin Euro integral
QD connector
Connections
Operating Conditions
K80L Models: 4-pin Euro-style integral QD (Q) standard. Terminal-wired models
available for use with bulk cable; compression fitting optional. Contact Factory for
cable information.
T8L Models: 4-pin Euro-style, 6" pigtail QD (QP), or 4-wire, 2 m (6.5') integral
cable, depending on model
Other Models: 4-pin Euro-style integral QD (Q), 6" pigtail QD (QP), or 4-wire,
2 m (6.5') integral cable, depending on model
Temperature: –40° to +50° C (–40° to +122° F)
Connector*
Green
Lights Independently Selected
Color 1
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
LED Function –
Color 2
Red
Color 3
Yellow
•
Minneapolis, MN U.S.A.
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
Inputs