LED BACKLIGHT, INFRARED

LEDIB70X70W

Manufacturer Part NumberLEDIB70X70W
DescriptionLED BACKLIGHT, INFRARED
ManufacturerBANNER ENGINEERING
LEDIB70X70W datasheet
 


Specifications of LEDIB70X70W

Led ConfigurationBarLed ColorInfrared
Forward Voltage24VForward Current If250mA
Display Size71mm X 71mmPeak Reflow Compatible (260 C)No
Wavelength Typ940nmSupply Voltage24VDC
Character Size70mmColorInfrared
Leaded Process CompatibleNo  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (177Kb)Embed
Next
Light Source
LED; see Models table above for wave lengths
Illumination
Diffused for use in applications needing a backlit light source.
Supply Voltage and Current
70x70 mm models: 24V dc @ 250 mA max.
Connections
2 m (6.5') or 9 m (30') PUR-jacketed, 3-conductor attached cable
Construction
Low-carbon steel with black zinc plating, acrylic window
Useful Life
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30%
after 10,000 hours and less than 40% after 20,000 hours.
Operating Conditions
Temperature: 0° to +50°C (+32° to 122°F)
Relative humidity: 90% at 50°C (non-condensing) max.
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not
use any other chemicals for cleaning.
PresencePLUS Pro
Backlight Wire
Controller Terminal Block
Brown
Pin 1 (+V*)
Blue
Pin 2 (-V*)
Black
Pin 4 (strobe)
* +V = 24V dc ± 10%
-V = dc common
Printed in USA
LED..B..W Series Backlights
®
Visible Red or Infrared Backlights in 2 sizes, with 3-Conductor Cable
• Diffused backlights for PresencePLUS
bannerengineering.com) for a complete lighting tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED matrix, in two sizes
• Direct connection to PresencePLUS Pro sensor or to an external power supply
using 3 discrete wires.
• Two sizes available (see models below)
• Bracket option(s) available for all models
Models*
LED Color
LEDIB70X70W
Infrared
LEDRB70X70W
Visible Red
LEDIB85X220W
Infrared
LEDRB85X220W
Visible Red
*For 9 m (30') integral cable, add suffix “W/30” to the model number (e.g., LEDIB70X70W W/30).
Specifications
Wiring Table
External Power Supply (Strobed)
+V
-V
+5V dc OFF
-V
11/04
Features
®
Pro sensor. See Banner’s web site (www.
Models
Wave Length
Active Area
940 nm
71 x 71 mm
(2.8" x 2.8")
660 nm
940 nm
85 x 220 mm
(3.35" x 8.67")
660 nm
85x220 mm models: 24V dc @ 500 mA max.
External Power Supply
(Continuous)
+V
-V
-V
ON
P/N 115349 rev. B

LEDIB70X70W Summary of contents

  • Page 1

    ... Bracket option(s) available for all models Models* LED Color LEDIB70X70W Infrared LEDRB70X70W Visible Red LEDIB85X220W Infrared LEDRB85X220W Visible Red *For 9 m (30') integral cable, add suffix “W/30” to the model number (e.g., LEDIB70X70W W/30). Specifications Wiring Table External Power Supply (Strobed +5V dc OFF -V 11/04 Features ® ...

  • Page 2

    ... P/N 115349 rev. B Dimensions 110.4 mm 25.4 mm (4.35") (1.0") 46.2 mm (1.81") (2.80") 220.0 mm (8.66") 275.8 mm (10.86") 244.3 mm (9.62") 94.0 mm 8.2 mm (3.70") (0.32") 15.8 mm (0.62") 61.0 mm (2.40") 13 0.7 (0.54") (7.1 mm Deep (0.98") 108.2 mm (4.26") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 ...

  • Page 3

    ... Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 LED..B..W Series Backlights Accessory Mounting Brackets SMBACM 10.2 mm 8.8 mm (0.35") 5.1 mm (0.20") 15.8 mm (0.62") 2x Ø4.6 mm (0.18" ...

  • Page 4

    ... LED..B..W Series Backlights WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period ...