LEDRLA290S-P BANNER ENGINEERING, LEDRLA290S-P Datasheet - Page 10

• Manufacturer Part Number: LEDRLA290S-P
• Description: LINEAR ARRAY LIGHT, RED
• Manufacturer: BANNER ENGINEERING

Specifications of LEDRLA290S-P

• Led Configuration: Array
• Led Color: Red
• Forward Voltage: 24V
• Peak Reflow Compatible (260 C): No
• Wavelength Typ: 627nm
• Supply Voltage: 24VDC
• Leaded Process Compatible: No
• Supply Current: 800mA
• Color: Red
• Viewing Angle: 10°

ExAmPLE APPLIcAtIonS
10
ID, Bar Code and Traceability Solutions
Accurately reads and grades 2D and 1D bar codes.
1D bar codes under plant conditions. That’s why major manufacturers depend on the
industry’s most reliable sensor expert for their vision needs. Banner’s PresencePLUS® Pro
andP4OMNI with optional bar code reading software offer tremendous power and
flexibility, for accurate high-speed bar code reading in the toughest environments.
The PresencePLUS® P4 BCR and high-resolution BCR 1.3 vision sensors have been
developed from the ground up for the most robust 2D and 1D linear bar code reading
capabilities—even when conditions and codes are less than ideal.
to verify product lots for consumer goods, Banner PresencePLUS sensors are engineered
to offer the highest read rates in low contrast/poor visibility conditions, or where marked
or formed bar codes have degraded. The BCR is “taught” the correct codes, either with
the sensor itself or over an industrial Ethernet network (EIP or Modbus TCP/IP). Banner’s
dedicated BCR solutions keep lines moving by reading despite problems such as low
contrast, shadows, orientation, surface variations or marking variables resulting from
degraded etching, stamping or printing.
Code 39, Code 128, Codabar, Interleaved 2 of 5, EAN-8 and EAN-13 (supports UPC-A),
UPC-E and Postnet. High-resolution BCR 1.3 models (1280 x 1024 pixels) feature 1.3
megapixel imaging that reads and grades smaller bar codes, or allows larger fields of
view. Codes and code grades can be communicated using the BCR’s serial port.
2D Stamped Bar code Verification
Manufacturing lots can be tracked for quality assurance using a PresencePLUS Pro
bar code reader to detect and verify a subtle 2D bar code stamped into metal
parts. Advanced 2D capabilities and a Banner Low-Angle Ring Light facilitate
detection of bar codes subject to stamping quality variables.
Simultaneous Verification of two Bar codes
The high-resolution PresencePLUS P4 BCR 1.3 delivers an extended field of view to
read 1D linear and 2D bar codes simultaneously to verify components in an
assembly are correctly paired. Strobed ring lighting and 1.3 megapixel resolution
provide increased image repeat rates for accurate reading at full line speed.
Large Area Verification for Sorting and Die Protection
The dies in tire presses suffer costly damage if the press tries to stamp tread into an
unstamped, or green, tire of the wrong size. To direct each tire to the correct press
at production line speeds, a series of six high-resolution PresencePLUS P4 BCR 1.3
vision sensors sort green tires based on bar code data printed on a label on the
tire’s bead, regardless of position or orientation.
miniature Bar code Verification
The advanced functionality of the PresencePLUS P4 BCR reads and verifies
miniaturized symbology, such as 2D bar codes, on small electronic components.
A Banner Backlight through the semi-transparent circuit membrane optimizes
contrast of the code for optimal reading conditions at high line speeds.
Pharmaceutical Product ID and Lot control
Federal pharmaceutical product identification and lot control requirements are
both stringent and evolving. The PresencePLUS Pro gives you the power and
flexibility to future-proof inspection, verification and tracking capabilities.
A traceability program is only as successful as the vision sensor that reads 2D or
Whether for production traceability of direct-marked manufactured components or
BCR models read 2D Data Matrix ECC200 and 1D linear bar codes such as