BXRA-N4000-00L0E Bridgelux, BXRA-N4000-00L0E Datasheet - Page 12

• Manufacturer Part Number: BXRA-N4000-00L0E
• Description: HIGH BRIGHTNESS LED,NEUTRAL WHITE,4400LM
• Manufacturer: Bridgelux
• Series: Bridgelux RS Arrayr

Specifications of BXRA-N4000-00L0E

• Led Color: Neutral White
• Luminous Flux @ Test: 4400lm
• Cct: 4250K
• Forward Current @ Test: 2.1A
• Forward Current If Max: 3A
• Forward Voltage @ Test: 24.6V
• Rohs Compliant: Yes
• Viewing Angle: 120°

Mechanical Dimensions
Notes for Figure 1:
Bridgelux RS Array Series Product Data Sheet DS16 (3/14/11)
Figure 1: Drawing for all RS Array part numbers.
1. Slots are for M2.5, M3 or #4 screws.
2. Solder pads are labeled “+” and “-“ to denote positive and negative, respectively.
3. It is not necessary to provide electrical connections to both sets of solder pads. Either set of
4. Drawings are not to scale.
5. Drawing dimensions are in millimeters.
6. Bridgelux recommends four tapped holes for mounting screws – refer to figure 15 (Mechanical
7. Unless otherwise specified, tolerances are ± 0.10mm.
8. Dimensions with parenthesis ‘( )’ are for reference only.
9. Refer to product Application Notes AN10 and AN11 for product handling, mounting and heat sink
10. The optical center of the LED Array is defined by the mechanical center of the array.
solder pads (6.35 x 2.03 mm rectangular pads or 3.50 mm tapered square pads) may be used
depending on application specific design requirements.
Assembly and Handling) for recommended spacing of holes.
recommendations.
Page 12 of 32