LED Area Light

LEDWA80X80W

Manufacturer Part NumberLEDWA80X80W
DescriptionLED Area Light
ManufacturerBANNER ENGINEERING
LEDWA80X80W datasheet
 


Specifications of LEDWA80X80W

Led Module TypeBoard + LEDLed ColorWhite
Power Module ConfigurationRectangularSupply Voltage24V
Forward Current @ Test250mAOperating Temperature Range0°C To +50°C
No. Of Pins3Forward Voltage24V
Forward Current If250mA  
1
Page 1
2
Page 2
Page 1/2

Download datasheet (198Kb)Embed
Next
Light Source
LED; see Models table above for wave lengths
Illumination
Lightly diffused, high-intensity area light
Infrared model: At a 24" distance, illuminates an 8" diameter area within 60% of the center intensity.
Visible LED models: At a 12" distance, illuminates a 4" diameter area within 50% of the center intensity.
Supply Voltage and Current
24V dc @ 250 mA max.
Voltage supplied by
Connections
3 conductor, 2 m (6.5') attached cable
Construction
Low-carbon steel with black zinc plating, acrylic window
Useful Life
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30%
after 10,000 hours and less than 40% after 20,000 hours.
Operating Conditions
Temperature: 0° to +50° C (+32° to 122° F)
Relative humidity: 90% at 50° C (non-condensing) max.
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use
any other chemicals for cleaning.
Printed in USA
LED..A80X80W Series Area Lights
Area Lights with 3-wire cables for use with PresencePLUS
• Lightly diffused area light for PresencePLUS Pro sensors. See Banner’s website at
www.bannerengineering.com for a complete lighting tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED light source.
• Direct connection to PresencePLUS Pro system or to an external power supply.
• Light level remains constant even when input voltage fluctuates 10% from nominal.
• Two available bracket options.
Models*
LEDIA80X80W
Infrared
LEDRA80X80W
Visible Red
LEDWA80X80W
White
LEDBA80X80W
Blue
LEDGA80X80W
Green
* For 9 m (30') cable, add suffix “W/30” to the model number (e.g., LEDBA80X80W W/30).
Specifications
PresencePLUS Pro
sensors, if operating at 24V dc (see sensor manual).
05/05
Pro Sensors
®
Features
Models
LED Color
Wave Length
850 nm
660 nm
All Visible
470 nm
525 nm
P/N 115607 rev. A

LEDWA80X80W Summary of contents

  • Page 1

    ... Light level remains constant even when input voltage fluctuates 10% from nominal. • Two available bracket options. Models* LEDIA80X80W Infrared LEDRA80X80W Visible Red LEDWA80X80W White LEDBA80X80W Blue LEDGA80X80W Green * For 9 m (30') cable, add suffix “W/30” to the model number (e.g., LEDBA80X80W W/30). ...

  • Page 2

    ... P/N 115607 rev. A Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • sensors@bannerengineering.com Wiring Table PresencePLUS Pro External Power Supply Pin 1, +V (24V dc ±10%) ...