H116BC VERMASON, H116BC Datasheet

PROBE, ESD, BLACK, 63MM

H116BC

Manufacturer Part Number
H116BC
Description
PROBE, ESD, BLACK, 63MM
Manufacturer
VERMASON
Datasheet
1.H116BC.pdf (2 pages)

Specifications of H116BC

External Height
87mm
External Width
63mm
Weight
2.3kg
Svhc
No SVHC (18-Jun-2010)
Approval Bodies
EN 100 015 Part 1, IEC 61340-4-1 ESD STM 11.12-2000
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
CYLINDER PROBES
Installation, Operation and Maintenance
Figure 1. 222009 Probe Kit.
Description
The Cylindrical Probe is to be used
in conjunction with a resistance
meter to measure point-to-point
resistance, volume resistance, and
resistance to ground in accordance
with EN 61340-5. The probe has
non-marking highly conductive pads.
A cap is supplied with the probes that
protects the pad when not in use.
The insulating jacket and shape aid
grip - insulation resistance is
approximately 10
Inspection
Remove the test unit from the carton
and inspect for shipping damages.
Each 222008 unit includes the
following:
1 Cylinder Probe, item #222008
Each 222009 unit includes the
following:
2 Cylinder Probes, item #222008
1 Carry Case
TB-7550 May 2007 Page 1 of 2
Phone: 0044 (0) 1462 672005, Fax: 0044 (0) 1462 670440 • e-mail: Service@Vermason.co.uk, Internet: Vermason.co.uk
6
Ω.
1 Avenue One • Letchworth, Hertfordshire SG6 2HB United Kingdom
TECHNICAL BULLETIN TB-7550
Instructions for Use
Resistance to ground
Test resistance to ground to ensure
that the conductive surfaces in the
EPA are correctly grounded.
Figure 2. Resistance to ground test.
1. One cylindrical probe is required
2. Connect the probe to a megohm
3. Connect the other ohmmeter lead
4. Measure the resistance at 100V
for this measurement.
meter and place it on the surface
to test.
to earth or to an ESD ground
point.
test voltage.
Point to point resistance
Measure point to point resistance to
check material properties.
Figure 3. Resistance to point test.
Figure 4. Resistance to point test.
1. Two cylindrical probes are required
2. Connect the probes to a megohm
3. Place the material to be tested on
4. Measure the resistance at 100V
5. Move the probes so as to measure
for this measurement
meter.
an insulative surface such as
clean glass and place the probes
on the material.
test voltage.
in a cross direction and repeat the
test.
© 2007 Vermason Ltd
Made in Britain

H116BC Summary of contents

Page 1

... Cylinder Probe, item #222008 Each 222009 unit includes the following: 2 Cylinder Probes, item #222008 1 Carry Case Phone: 0044 (0) 1462 672005, Fax: 0044 (0) 1462 670440 • e-mail: Service@Vermason.co.uk, Internet: Vermason.co.uk TB-7550 May 2007 Page TECHNICAL BULLETIN TB-7550 Instructions for Use Resistance to ground ...

Page 2

... The two probes should be placed in line as precisely as possible. 4. Measure the resistance at 100V test voltage. Figure 5. Volume resistance test. Phone: 0044 (0) 1462 672005, Fax: 0044 (0) 1462 670440 • e-mail: Service@Vermason.co.uk, Internet: Vermason.co.uk TB-7550 Page Specifications Weight 2.3kg Dimensions ...