Spec-00306
F P H (763) 422-2211
FX (763) 422-2600
Thermal Management
Fans, Blowers, Louvers and Vents
Cooling Fan and Exhaust Packages and Accessories
Cooling Fan and Exhaust Packages
Industry Standards
CSA certified (fan only)
CE
Application
Cooling Fan and Exhaust Packages are designed for limited-space
enclosures that require a reliable and filtered airflow. Where positive
airflow is not required, Exhaust Packages can be used on both the
inlet and outlet.
Engineered for 50,000 hours of continuous operation without
lubrication or service. For both Type 1 and Type 12 systems a monthly
maintenance schedule is recommended to ensure optimal cooling
performance.
Features
• Cooling Fan Package includes fan, air filter, composite air plenum,
• Exhaust Package includes air filter, filter retainer with integral
• EMC Upgrade Kit includes a grille standoff collar and a special EMC
• Washable foam (Type 1) or disposable (Type 12) filter in fan.
• Dynamically-balanced fan impellers molded from polycarbonate
• 4-in. fan is thermally protected and uses permanently-lubricated
• 6- and 10-in. fans have ball bearing construction and split-
UL 508A Component Recognized, File Number E61997
TFP# Models: Type 1
TFP# UL 12 Models: Type 12
finger guard and grille
finger guard and grille
shielding grille
Optional washable aluminum air filter is available for Type 1
applications.
material
ball bearings
capacitor motors that are thermally protected to avoid premature
failure
Subject to change without notice
Cooling Fan and Exhaust Packages and Accessories
PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com
• Fans have leadwires for power connection with ends stripped 1/2
• All mounting hardware and installation instructions are furnished
Filters
Standard Type 1 air filters are washable foam.
Type 12 air filters are not washable.
Installation
Fan and exhaust packages can be installed on any surface of an
enclosure. They are most effective when the fan assembly is located
on a lower panel of the enclosure and the exhaust grille is positioned
near the top of the opposite side. This installation assists heat transfer
by causing slightly more turbulence and also prolongs the working
life of the fan since it is located in the path of the cooler air entering
the enclosure.
The height and width of the cooling fans and exhaust grilles can
be rotated 90 degrees for mounting on narrow enclosures. Allow
adequate clearance for servicing the fan when equipment is installed
inside the enclosure and for replacing filters on both the fan and
the exhaust. Cutout dimensions for both the fan and the exhaust
are shown in the order table. Order the fan and exhaust packages
separately.
Finish
Stainless steel grilles have brushed finish.
ABS composite grille is black.
Accessories
Aluminum Type 1 and Hi-Density Type 12 Filters
EMC Upgrade Kit
Grille Options:
Bulletin: D85
Stainless Steel
Black ABS Plastic
in. (12 mm)
Thermal Management: Fans, Blowers, Louvers and Vents
© 2011 Pentair Technical Products
Spec-00306 F
1
