DATAMAN-48PRO+ DATAMAN, DATAMAN-48PRO+ Datasheet - Page 2

• Manufacturer Part Number: DATAMAN-48PRO+
• Description: 48Pro+ Gang Universal ISP Programmer
• Manufacturer: DATAMAN

Specifications of DATAMAN-48PRO+

• Ic Product Type: Programmer, Universal
• No. Of Devices Supported: 32000
• Features: Programmer, Cables, Manual, Software
• Kit Contents: Universal ISP Programmer, USB Cable, ISP Cable, User Manual, Software

Base Unit (DAC)
• USB 2.0 high-speed compatible port, up to 480 Mbit/s transfer rate
• FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
• On-board intelligence: powerful microprocessor and FPGA based state machine
• Three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
• VCCP range 0..8V/1A
• VPP1, VPP2 range 0..26V/1A
• Selftest capability
• Protection against surge and ESD on power supply input and parallel port
• Banana jack for ESD wrist strap connection
• Banana jack for connection to ground
ZIF Socket Pindriver
• 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices
• Pindrivers: 48 universal
• VCCP/VPP1/VPP2 can be connected to each pin
• Perfect ground for each pin
• FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
• Analog pindriver output level selectable from 1.8V up to 26V
• Current limitation, overcurrent shutdown, power failure shutdown
• ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
• Continuity test: each pin is tested before every programming operation
ISP Connector
• 20-pin male type with missinsertion lock
• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable
• 1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins
• Programmed chip voltage (VCCP) with both source/sink capability and
• 1x VPP voltage (range 2V..25V/50mA), can be applied to six pins
• Target system supply voltage (range 2V..6V/250mA)
• ESD protection on each pin of ISP connector (IEC1000-4-2: 15kV air, 8kV
• Two output signals, which indicate state of work result = LED OK and LED
• Input signal, switch YES! equivalent (active level: max. 0.8V)
Software:
User Interface
• Programmer is driven by an easy-to-use control program with pull-down
• Standard device-related commands (read, blank check, program, verify, erase)
• All known data formats are supported. Automatic file format detection and
IN THE UK…
Dataman Programmers Ltd.
Station Road, Maiden Newton
Dorset DT2 0AE, UK
Tel [phone]
Fax [phone]
connection
up to 48-pin
from 1.8V up to 5V to handle all (low-voltage including) devices
voltage sense
contact)
Error (active level: min 1.8V)
menu, hot keys and on-line help. Selecting of device is performed by its class,
by manufacturer or simply by typing a fragment of vendor name and/or part
number.
are enhanced by test functions (insertion test, signature-byte check) and
additional special functions (autoincrement, production mode -
programming starts immediately once chip inserted into socket).
conversion during loading of file.
IN THE US…
Dataman Inc.
215 East Michigan Avenue
Orange City, Florida 32763 USA
Tel [phone]
Fax [phone]
• The rich-featured auto-increment function enables one to assign individual
• The software provides extensive information about programmable devices
• The software provides full information for ISP implementation: Description
• The remote control feature allows the PG4UW software to be flow controlled
• Multiple devices can be programmed and tested via JTAG chain: JTAG chain
• Multiple 48Pro+ programmers can be connected to the same PC (via USB
The Dataman 48Pro+ supports over 32,000 of the most popular devices in use
today - with future devices being added monthly. Dataman 48Pro+ coverage
includes the following device types:
Programmer (ZIF Socket)
1-Wire E(E)PROM, BI-PROM, Configuration (EE)PROM, CPAL, EEPROM, EPROM,
EPLD, Flash, Flash EPROM, FPGA, GAL, MACH, Microcontrollers, MROM, NV RAM,
PAL, PEEL, PLD, PROM, Serial E(E)PROM
Programmer (ISP Connector)
Microcontrollers, PLD, Serial E(E)PROM
Package Includes:
• Dataman 48Pro+ Universal ISP Programmer
• Moulded USB Cable
• ISP cable
• Diagnostic POD for selftest of the programmer
• Diagnostic POD for selftest of the ISP connector
• Anti-dust cover for ZIF socket
• User manual
• Software
• Optional range of adapters and socket converters also available
Warranty and Support:
• 30 day money back guarantee* - If you don't like it, send it back
• Three year guarantee - Three years parts and labour warranty, on the 48Pro+
• Life-Time Technical Support - 48Pro+ technical support is available free via
• Life-Time Software Updates - 48Pro+ software updates are available free via
*Applies to orders from UK/US office only
Available from…
serial numbers to each programmed device - or simply increments a serial
number, or the function enables one to read serial numbers or any
programmed device identification signatures from a file.
including detailed drawings of all available packages. The software also
provides explanations of chip labelling (prefixes and suffixes) for each of the
supported chips.
of ISP connector pins, recommended target design and other necessary
information.
by another application - either using .BAT file commands or DLL file
(C/PAS/VBASIC/.NET).
(ISP-Jam) or JTAG chain (ISP-VME).
port) achieving an extremely powerful multiprogramming system, supporting
as many devices as a single 48Pro+ programmer and without a noticeable
decrease in programming speed. Concurrent multiprogramming is also
supported allowing each programmer to work independently increasing
throughput.
Dimensions: 195 x 140 x 55mm (7.7 x 5.5 x 2.2inches)
Weight: 0.9Kg (1.98lbs)
Operating voltage: 110-250V AC
Power consumption: max. 20W active / approx. 2W sleep
universal device programmer
our website and telephone helpdesk for life
our website for life
www.dataman.com