46015-0202 Molex Inc, 46015-0202 Datasheet - Page 5

• Manufacturer Part Number: 46015-0202
• Description: HEADER, MINI-FIT HCS, 2WAY
• Manufacturer: Molex Inc
• Series: Mini Fit Plus HCS, 46015r

Specifications of 46015-0202

• Gender: Plug
• No. Of Contacts: 2
• No. Of Rows: 2
• Pitch Spacing: 4.2mm
• Connector Mounting: PCB
• Contact Termination: Through Hole
• Contact Material: Copper Alloy
• Contact: RoHS Compliant
• Voltage Rating: 600 V
• Current Rating: 12 A
• Pitch: 4.2 mm
• Number Of Positions / Contacts: 2
• Mounting Style: Through Hole
• Contact Plating: Tin
• Housing Material: Nylon
• Number Of Rows: 2
• Lead Free Status / Rohs Status: Details

REVISION:
DOCUMENT NUMBER:
B4
5.2 MECHANICAL REQUIREMENTS
ITEM
10
11
PS-45750-001
1
2
3
4
5
6
7
8
9
ECR/ECN INFORMATION:
EC No:
DATE:
Thumb latch Yield
(preconditioning)
Operation Force
Retention Force
Crimp Terminal
Crimp Terminal
Unmate Forces
Insertion Force
(into Housing)
Terminal Mate
Pullout Force
Thumb latch
(in Housing)
Wire Crimp
Per Circuit
Reseating
(Random)
Durability
Durability
Retention
Vibration
Strength
UCP2009-0064
2008 / 07 / 08
Normal
(Axial)
Force
TEST
and
PRODUCT SPECIFICATION
Mate and unmate terminals (male to female)
at a rate of 25 ± 6 mm (1 ± ¼ inch) per
minute for 5 mating cycles.
Axial pullout force on the terminal in the
housing at a rate of 25 ± 6 mm (1 ± ¼ inch)
per minute.
Mate connectors by hand, 20 cycles for Tin or
50 cycles for Gold prior to Environmental test.
Mate connectors up to 100 (Sn) or 250 (Au)
cycles at a maximum rate of 10 cycles per
minute prior to Environmental Tests.
Unmate / mate connectors by hand per
number of cycles specified in Test Sequence.
EIA 364-28: Mate connectors and vibrate per,
test condition VII.
Apply an axial pullout force on the wire at a
rate of 25 ± 6 mm (1 ± ¼ inches) per minute.
Apply an axial insertion force on the terminal
at a rate of 25 ± 6 mm (1 ± ¼ inches).
Apply a perpendicular force simultaneously
to each beam until the desired total
deflection is achieved. Return to original
size, then deflect beams a second time and
measure normal force.
Depress latch at a rate of 25 ± 6mm (1 ± ¼
inches) per minute.
Mate unloaded housings fully. Pull apart in
an axial direction at a rate of 25 ± 6mm (1 ±
¼ inches) per minute.
TITLE:
CREATED / REVISED BY:
BWIRKUS
TEST PROCEDURE
PRODUCT SPECIFICATION FOR
CONNECTOR SYSTEM
MINI-FIT PLUS HCS
CHECKED BY:
APATEL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
16 Awg = 68.4 N (15.4 lbf) Min.
18 Awg = 68.4 N (15.4 lbf) Min.
20 Awg = 58.7 N (13.2 lbf) Min.
Gold
Gold
Discontinuity < 1 microsecond
Tin
Tin
MAXIMUM insertion force
MINIMUM retention force
16.67 N (3.75 LBF) MAX.
10 milliohms MAXIMUM
10 milliohms MAXIMUM
68 N (15.29 LBF) MIN.
(change from initial);
Visual: no damage
Visual: no damage
REQUIREMENT
15.0 N (3.37 lbf)
MIN. withdrawal force
MIN. withdrawal force
MAX. insertion force;
MAX. insertion force;
30 N (6.74 lbf)
1.96 N (200 grams)
0.49 N (50 grams)
1.11 N (0.25 lbf)
11.1 N (2.5 lbf)
2.2 N (0.5 lbf)
4.4 N (1.0 lbf)
MINIMUM
MINIMUM
APPROVED BY:
APATEL
SHEET No.
5
of
11