* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
* Contact JST for details.
Standards ––––––––––––––––––––––
0
Terminals and Connectors" at the end of this catalog.
Applicable for waterproof usage. Its
waterproof grade is more than 7 ingress
protection of JIC C 0920.
(IP 67 of IEC 60529)
Recognized E60389
2.0mm
(.079") pitch
Crimp
JWPF
Disconnectable Crimp style connectors
CONNECTOR
Features ––––––––––––––––––––––––
• Waterproof performance
• Contained seal ring
• Solid rubber seal
• Double-spring construction
• Housing-to-terminal locks
• Inner housing lock
• Interchangeability
• Header for use specifically with resin coated
Specifications –––––––––––––––––––
• Current rating:
• Voltage rating:
• Temperature range:
• Contact resistance: Initial value/5m
• Insulation resistance:
• Withstanding voltage:
• Applicable wire: AWG #26 to #22
• Waterproof grade:
("potted") PC board
More than grade 7 ingress protection of JIC C 0920. (IP 67 of
IEC 60529)
Seal ring is applied for complete sealing at mating side that is
contained in header, which protects from dust, scratch, etc.
Solid rubber seal is used for wire side sealing that makes the
size compact.
Contact has double-spring construction, main spring and assist
spring, that ensures superior contact force.
Spring action housing-to-terminal locks are inherent part of the
housing, and assure smooth contact insertion and firm contact
retention yet with low insertion force.
This inner housing lock secures the plug to the receptacles and
prevents accidental disconnection. The lock with protector on
both sides is protected and is not affected by external forces
that might result from the routing of wires.
Designed to accept wire-to-wire type JWPF connector
receptacle.
This header is tall and fully shrouded so as to prevent the resin
used to coat the PC board from coming into contact with the
mating pins.
3A AC, DC (AWG #22)
100V AC, DC
0.13 to 0.33mm
Insulation O.D./1.4 to 1.6mm (.055" to .063")
-
(including temperature rise in applying
electrical current)
After environmental testing/10m
More than grade 7 ingress protection of
JIS C 0920(IP 67 of IEC 60529)
40˚C to
800M
1,000V AC/minute
+
85˚C
2
min.
max.
max.
83