133-3402-101 JOHNSON/EMERSON, 133-3402-101 Datasheet - Page 2

• Manufacturer Part Number: 133-3402-101
• Description: RF/COAXIAL, MCX PLUG, R/A, 50OHM, CRIMP
• Manufacturer: JOHNSON/EMERSON

Specifications of 133-3402-101

• Body Style: Right Angle Plug
• Coaxial Termination: Crimp
• Rg Cable Type: RG-178, 196
• Contact Material: Brass
• Contact Plating: Gold
• Frequency Max: 6GHz
• Connector Type: MCX Coaxial
• Impedance: 50ohm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ELECTRICAL RATINGS
Impedance: 50 Ohms
Frequency Range: Connectors .............................................. 0-6 GHz
VSWR: (f = GHz)
RG-178 cable ................................... 1.17 + .04f
RG-316 and .086 semi-rigid cable ... 1.13 + .04f
Adapters .............................................................................. 1.13 + .04f
Uncabled receptacles, Dummy loads ............................................ N/A
Working Voltage: (Vrms maximum)†
Connectors for Cable Type
Dielectric Withstanding Voltage: (VRMS minimum at sea level)
Corona Level: (Volts minimum at 70,000 feet)
Insertion Loss: (dB maximum, tested at 1 GHz)
Insulation Resistance: 10,000 megohms minimum
Contact Resistance: (milliohms maximum)
Center contact (straight cabled connectors,
Center contact (right angle cabled connectors) .... 5.0
Outer contact ........................................................ 1.0
Braid to body (gold plated connectors) ................. 1.0
Braid to body (nickel plated connectors) ............... 2.5
RF Leakage: (dB typical tested at 2.5 GHz)
MCX - 50 Ohm Connectors
Specifications
RG-178 ................................................... 250
RG-316, .086 semi-rigid uncabled
Dummy loads ............................................................................. N/A
Connectors for RG-178 .............................................................. 750
Connectors for RG-316, .086 semi-rigid,
Dummy loads ............................................................................. N/A
Connectors for RG-178 .............................................................. 190
Connectors for RG-316, .086 semi-rigid
Dummy loads ............................................................................. N/A
Straight cable connectors and adapters ................................. 0.1 dB
Right angle cable connectors ................................................. 0.2 dB
Uncabled receptacles, dummy loads ......................................... N/A
uncabled receptacles and adapters) ................. 5.0
Cable connectors .................................................................. -55 dB
Uncabled receptacles and adapters, dummy loads ................... N/A
uncabled receptacles, adapters ............ 335
Avoid user injury due to misapplication. See safety advisory definitions on page 2.
uncabled receptacles, adapters .............................................. 250
uncabled receptacles, adapters ............................................ 1000
Johnson Components
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
JACK
Dummy loads .......................................... 0-1 GHz
TM
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomponents.com
Straight Cabled
MATING ENGAGEMENT FOR MCX SERIES COMPATIBLE WITH CECC 22220
Connectors
Sea Level
Initial Environmental
Cabled Connectors
Right Angle
1.07 + .06f
1.07 + .04f
70K Feet
65
85
After
15.0
N/A
N/A
8.0
1.5
PLUG
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)
Power Rating (Dummy Load): 0.5 watt @ +25 C, derated to 0.25 watt
@ +125 C
MECHANICAL RATINGS
Engagement Design: Compatible with CECC 22220, Series MCX
Engagement Force: 5.6 pounds maximum axial force
Disengagement Force: 8 pounds maximum axial force, 1 pound min.
Contact Retention: 2.3 pounds min. axial force (captivated contacts)
Cable Retention:
Connectors for RG178 ................................ 10
Connectors for RG316 ................................ 20
Connectors for RG316DS ........................... 25
Connectors for .086 semi-rigid .................... 30
* or cable breaking strength whichever is less.
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)Durability: 500 cycles minimum
Temperature Range:Connectors ............................... - 65 C to + 165 C
Thermal Shock: MIL-STD-202, Method 107, Condition F (N/A dummy
loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated**
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
Connectors for RG178 ............................................................... 500
Connectors for RG316 and adapters ......................................... 700
.086 semi-rigid ............................................................................ 670
Uncabled receptacles ................................................................. 600
Dummy loads ............................................................................. N/A
1 inch-ounce min. torque (uncabled receptacles)
per MIL-G-45204 .00001” min or nickel plated per QQ-N-290 or
bright tin plated
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-
45204 .00003" min.
.00001" min. or nickel plated per QQ-N-290
.00001" min. or nickel plated per QQ-N-290
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
JACK
NOTES
1. ID of contact to meet VSWR mating characteristics and connector
2. Must meet the force to engage and disengage when mated with
durability when mated with a dia. .019-.021 (0.48-0.53) male contact.
mating part.
Dummy loads .......................... - 65 C to + 125 C
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Axial Force*
(pounds)
INCHES (MILLIMETERS)
Torque
(in-oz)
N/A
N/A
N/A
PLUG
16