142-4407-001 JOHNSON/EMERSON, 142-4407-001 Datasheet
142-4407-001
Manufacturer Part Number
142-4407-001
Description
RF/COAXIAL, SMA RP PLUG 50OHM CRIMP/SLDR
Manufacturer
JOHNSON/EMERSON
Datasheet
1.142-4407-001.pdf
(2 pages)
Specifications of 142-4407-001
Body Style
Straight Plug
Coaxial Termination
Solder / Crimp
Rg Cable Type
RG-58, 141, 303
Contact Material
Beryllium Copper
Connector Type
SMA RP Coaxial
Impedance
50ohm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
SMA 50 Ohm Reverse Polarity
Straight Crimp Type Plug -
Solder or Crimp Captivated Contact
1. Identify connector parts. (3 piece parts - except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin center conductor if contact will be solder attached. Do not
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and under braid. Then seat body assembly firmly onto contact. The cable may have
Johnson Components
tin center conductor if contact is to be crimp attached. When stripping LMR-100 low loss cable, remove foil back to where cable jacket
is stripped. A wire stripper of correct size is recommended for this step. Slide heat shrink (as applicable) and crimp sleeve onto jacket
of cable.
Solder Attachment: Solder contact to center conductor through solder hole using .020 (0.51) diameter solder. Use a minimum
amount of solder for a good joint.
Crimp Attachment: Crimp contact to center conductor using Johnson Components
positioner 141-0000-907. Crimp location should be centered between end of contact and X-hole. Crimp attachment to solid center
conductor cables is not recommended.
to be held in a clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp sleeve forward and crimp using recommended
crimp tool. Slide heat shrink forward and shrink (as applicable).
RG-58/U, 141, 303
CABLE TYPE
TM
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com
GOLD PLATED
142-4407-001
NICKEL PLATED
142-4407-006
RG-58/u, 141, 303
CABLE GROUP
TM
Hand Tool 144-0000-910, setting #2, with
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-4407-001/006
PART NUMBER
CRIMP HEX
.213 (5.41)
Related parts for 142-4407-001
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
RF/COAXIAL, SMA RP PLUG, R/A 50OHM CRIMP
Manufacturer:
JOHNSON/EMERSON
Datasheet:
Part Number:
Description:
CONN JACK 4HOLE FLANGE MOUNT GOL
Manufacturer:
Emerson Network Power
Datasheet:
Part Number:
Description:
CONN JACK RCPT R/A SMA PCB
Manufacturer:
Emerson Network Power
Datasheet:
Part Number:
Description:
CONN JACK FLANGE MOUNT GOLD
Manufacturer:
Emerson Network Power
Datasheet:
Part Number:
Description:
CONN JACK BULKHEAD PCB .281" GOL
Manufacturer:
Emerson Network Power
Datasheet:
142-4407-001 Summary of contents
Page 1
... P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com NICKEL PLATED 142-4407-006 TM CABLE GROUP RG-58/u, 141, 303 INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST Hand Tool 144-0000-910, setting #2, with PART NUMBER CRIMP HEX 142-4407-001/006 .213 (5.41) ...
Page 2
... P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7 MHz) Connectors for RG-316; LMR-100, 195, 200 ................................... 500 Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 670 MECHANICAL RATINGS Right Angle Engagement Design: MIL-C-39012, Series SMA ...