Specifications
Capacitance temperature coefficient
Operating Temperature Range
@20°C (<70% RH)for 1 minute at
Applications
Features
Capacitance Tolerance
Metallized polypropylene
High dvdt
Small size
EMI Filter
Line by pass
Insulation Resistance
at 1 kHz and 20°C
Dielectric Strength
Dissipation Factor
Lead terminations
100VDC applied
Life Expectancy
Self Inductance
Impulse voltage
Humidity test
Construction
(24 pulses)
AC voltage
(50/60 Hz)
Electrodes
Coating
MKP
3757 W. Touhy Ave., Lincolnwood, Il 60712 ● (847)675-1760● Fax (847) 675-2850 ● www.illcap.com
1000 hours at 110°C at 125% of rated voltage with once every hour the voltage is increased to 1000 VAC
250/310 VAC
Dissipation Factor change
Dissipation Factor change
500 Hours at 90 to 95% RH, 40C and no voltage applied after which the following voltage will be applied
Capacitance
Terminal to Terminal
.1% Max
Capacitance change
Insulation resistance
Capacitance change
Insulation resistance
Tan δ
Terminal to case
CSA
<0.33uF
>0.33uF
Metallized polypropylene film
change
change
<1 nano-Henry per mm of lead spacing and lead length
Class X2 EMI/RFI Boxed
Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)
275 VAC
ENEC
Terminal to Terminal
capacitors
5000 MΩxuF
15000 MΩ
2050VDC applied between the terminals and case for 60 Seconds and 20°C
C<0.0068uF 1500VAC, C>0.0068uF 1075VAC
<5% of initially measured value
<0.15% at 1kHz
>100% of initially specified value (T-T)
>3000 MΩ (Terminal to case)
<5% of initially measured value
<0.15% at 1kHz
>50% of initially specified value (T-T)
>15000 MΩ (Terminal to case)
275 VAC
CQC
C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds
Vacuum deposited Metal layers
C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds
for 1 minute to each capacitor.
Lead free tinned copper leads
Metallized Polypropylene film
-200ppm/°C, +100ppm/°C
Low self inductance
Low ESR
Across the line
Antenna coupling
+10% at 1 kHz, 20°C
C> 1uF Vp=2.5kV √C
C< 1uF Vp=2.5kVDC
-40°C to +110°C
250/310 VAC
for 0.1 seconds
UL
Cut-off current: 2A ac or 10mAdc
Current limiting resistance: 1Ω/V
>30000 MΩ at 100VDC
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
>5000 MΩ at 500VDC
Terminal to Case