40L3471 GENTEQ, 40L3471 Datasheet - Page 6

CAPACITOR PP FILM 4.7UF, 400V, AXIAL

40L3471

Manufacturer Part Number
40L3471
Description
CAPACITOR PP FILM 4.7UF, 400V, AXIAL
Manufacturer
GENTEQ
Datasheet

Specifications of 40L3471

Capacitor Dielectric Type
Polypropylene
Capacitance Tolerance
± 10%
Voltage Rating
400VDC
Esr
0.007ohm
Life Time @ Temperature
1000 Hours @ 105°C
No. Of Pins
2
Capacitance
4.7µF
Brand/series
40L Series
Current, Ripple
450 A
Diameter
0.88 in. +⁄- 0.06 in.
Diameter, Lead Wire
20⁄18 AWG
Dissipation Factor
0.1% (Max.) @ 0.1kHz, 25 °C
Esr, Maximum
7 Milliohms @ 100 kHz, 25 °C
Esr, Test Condition
@ +25°C, 100 kHz
Insulation Resistance
200000 Megohms
Length
1.75 in.
Length, Lead
2 in. ± 0.25 in.
Material, Element
Polypropylene Metallized
Temperature, Operating, Maximum
105 °C
Temperature, Operating, Minimum
-55 °C
Termination
Axial
Tolerance
  +- 10%
Voltage, Rating
400⁄250 VDC⁄VAC
Capacitance Range
0.47 to 10.0 uF
Capacitance Variation With Temperature
+-3% from -55°C to +105 °C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
02
The 40L Series are high-performance dry, axial-leaded capacitors designed specifically for demanding
electronic applications. They are commonly used in input and output filters and for DC blocking in high-
frequency switch-mode power supplies. The low electrical losses of the polypropylene film dielectric
combined with the enhanced current carrying ability of the special “graded” metallized electrodes
results in outstanding performance. If there are any questions regarding the correct application of these
products, please contact your RBC sales representative.
SPECIFICATIONS:
Available Capacitance Range:
Capacitance Tolerance:
Capacitance Variation with Temperature:
Rated Voltage:
Rated Current:
Equivalent Series Resistance (ESR):
Capacitance:
Operating Temperature:
Storage Temperature:
Dissipation Factor:
Insulation Resistance:
Leads:
Package Construction:
GTC
005
– 02 / 10
(40L) Snubber & High-Current DC
www.genteqcapacitors.com
±3% from -55ºC to +105ºC
Voltage.
RMS current in amperes.
measured at 25ºC in the range of 20-100,000Hz.
Values shown in the table at 25ºC, 1KHz.
1-minute energization at 25ºC.
20 or 18 AWG electroplated solid copper wire leads.
(gauge tolerance: ±0.001 in.)
compound
0.47 to 6.8µF
±10%
See Rating Tables. Rating is the Maximum Peak DC
See Rating Tables. The rating is the Maximum allowable
See Rating Table. The rating is the maximum value
-55ºC to +105ºC
-55ºC to +105ºC
0.1% maximum at 25ºC, 1KHz
200,000Megohms - µF minimum at 100 VDC after
Fire retardant tape wrap with polyurethane potting
400 and 600 Volts Peak

Related parts for 40L3471