2222 338 10104 Vishay, 2222 338 10104 Datasheet - Page 6

• Manufacturer Part Number: 2222 338 10104
• Description: CAPACITOR, CLASS X1 0.1UF 440V CAPACITOR, CLASS X1 0.1UF 440V
• Manufacturer: Vishay
• Series: 2222338r

Specifications of 2222 338 10104

• Capacitance: 100NF
• Voltage Rating, Ac: 440V
• Voltage Rating, Dc: 1000V
• Capacitor Dielectric Type: POLYPROPYLENE
• Tolerance,: 20%
• Tolerance, -: 20%
• Temp,: ROHS COMPLIANT

MKP 338 1 X1
Vishay BCcomponents
APPROVALS
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to:
“Packaging Information”: www.vishay.com/doc?28139 or end of catalog
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
• Product height with seating plane as given by “IEC 60717” as reference: h
Storage Temperature
• Storage temperature: T
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86
to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
388
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)
UL1414
UL1283
UL1283 and (CSA-C22.2 No. 8)
CB-Test Certificate
The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
SAFETY APPROVALS X1
stg
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
Eccentricity
VOLTAGE
Interference Suppression Film Capacitors
440 Vac
250 Vac
440 Vac
440 Vac
440 Vac
For technical questions, contact: [e-mail]
16
MKP Radial Potted Type
l
max.
= I + 0.3 mm
10 nF to 100 nF
100 nF to 1 µF
10 nF to 1 µF
10 nF to 1 µF
10 nF to 1 µF
VALUE
b
max.
max.
= b + 0.3 mm
≤ h + 0.3 mm or h
®
CBA116
FILE NUMBERS
max.
F1 2008060
E112471
E109565
E109565
F1 5256
≤ h’ + 0.3 mm
Document Number: 28116
Revision: 07-Jan-09