2322-1G JOHANSON MANUFACTURING, 2322-1G Datasheet - Page 2

• Manufacturer Part Number: 2322-1G
• Description: CAPACITOR TRIMMER 1PF-5PF, 250V
• Manufacturer: JOHANSON MANUFACTURING
• Series: Cera-Trimr

Specifications of 2322-1G

• Voltage Rating: 250VDC
• Capacitor Dielectric Type: Ceramic
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Adjustment Type: Top
• Capacitance Range: 1pF - 5pF
• Operating Temperature Range: -55°C To +125°C
• Msl: MSL 6 - Mandatory Bake Before Use
• Termination Type: SMD
• Rohs Compliant: Yes
• Filter Terminals: SMD
• Capacitance Max: 5pF
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Important Information: Storage Instructions for Cera-Trim®
Sealed Cera-Trim® Capacitors are packed with a 1/6 unit of desiccant and must remain in their original packing as long as possible before
soldering. Care should be taken to make sure the re-sealable outer bag is completely sealed after each use.
All Cera-Trims, with or without process seals, should be stored in a temperature and humidity controlled environment.
If sealed Cera-Trims need to be re-packed then they must be packed in a re-sealable poly/metal anti-static bag with a fresh 1/6 unit of desiccant.
If sealed Cera-Trims have been inadvertently left exposed to ambient humidity for more than 1 hour, then dry the units per the following procedure:
for sealed units that are
Place units in an oven at 35 ± 5°C for 8 hours minimum or faster drying may be done at 125 ± 5°C for 60 to 90 minutes. Re-pack using fresh
desiccant packs after drying.
for sealed units that are in tape & reel packaging
Place units in an oven at 35 ± 5°C for 8 hours minimum. Re-pack using fresh desiccant packs after drying.
2320-0
2320-4
2320-2
2320-3
2320-1
.006
.167
.020
STAY TUNED
Johanson Manufacturing Corporation
.086
2320-0SL
2320-1SL
2320-2SL
2320-3SL
2320-4SL
not
in tape & reel packaging
.195
.180
Epoxy Backseal
.030
Protective
Process Seal
.025 Square
Drive Tuning
Terminal
.020 x 45° Indicates
Rotor Terminal
301 Rockaway Valley Road, Boonton, New Jersey 07005
.092
Epoxy Backseal
SL
2322-0G
2322-1G
2322-2G
2322-3G
2322-4G
.006
.020
Process Seal
RoHS
Protective
.086
2322-0GSL
2322-1GSL
2322-2GSL
2322-3GSL
2322-4GSL
.180
Pb
.240
Phone [phone]
7.5 to 18.0
8.5 to 25.0
.030
.045
.020 x 45° Indicates
Rotor Terminal
Terminal
www.johansonmfg.com
.167
.025 Square
Drive Tuning
Fax [phone]
UPDATED 09/07
.092
Sep 07