DSC2512-47RJT18 Welwyn Components, DSC2512-47RJT18 Datasheet - Page 5

• Manufacturer Part Number: DSC2512-47RJT18
• Description: RESISTOR, THICK FILM, 47OHM, 1.5W, 5%
• Manufacturer: Welwyn Components
• Series: DSCr

Specifications of DSC2512-47RJT18

• Resistance: 47ohm
• Resistance Tolerance: ± 5%
• Power Rating: 1.5W
• Resistor Element Material: Thick Film
• Resistor Case Style: 2512
• No. Of Pins: 2
• Temperature Coefficient: ± 100ppm/°C
• Tolerance: 5 %
• Termination Style: SMD/SMT
• Package / Case: 2512 (6431 metric)
• Voltage Rating: 500 Volts
• Operating Temperature Range: - 55 C to + 155 C
• Dimensions: 3.2 mm W x 6.5 mm L x 0.8 mm H
• Product: Thick Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DSC resistors are ideally suited for handling by automatic
methods due to their rectangular shape and the small
dimensional tolerances. Electrical connection to a ceramic
substrate or to a printed circuit board can be made by reflow
or wave soldering of wrap-around terminations.
Wrap-around terminations provide good leach properties and
ensure reliable contact. Due to the robust construction, the
DSC can be immersed in the solder bath for 30 seconds at
260°C. This enables the resistor to be mounted on one side
Chip Resistors
DSC Series
Specify type reference etc as shown in this example of DSC2512 10K ohms 1%.
© Welwyn Components Limited
Telephone: [phone] · Facsimile: [phone] · Email: [e-mail] · Website: www.welwyn-tt.com
Application Notes
Ordering Procedure
Type
Size
Value (use IEC62 code)
Tolerance (use IEC62 code)
D
F
J
0.5%
1%
5%
DSC
2512
Bedlington, Northumberland NE22 7AA, UK
-
10K
F
T 1 8
T18
T3
of a printed circuit board and wire-leaded components
applied on the other side. DSC is compatible with typical
Pb-free soldering materials and temperature profiles
DSC resistors themselves can operate at a maximum
temperature of 155°C. For soldered resistors, the joint
temperature should not exceed 110°C. This condition is met
when the stated power levels at 70°C and recommended
pad and trace areas are used. Allowance should be made
if smaller areas of copper are used.
Tape
1206 or 2010
2512
Welwyn Components
3000/reel
1800/reel
Standard
Packing
07. 08