NHD-0216K1Z-NS(RGB)-FBW Newhaven Display, NHD-0216K1Z-NS(RGB)-FBW Datasheet - Page 21

• Manufacturer Part Number: NHD-0216K1Z-NS(RGB)-FBW
• Description: LCD Character Display Modules FSTN (-) Transm 80.0 x 36.0
• Manufacturer: Newhaven Display
• Series: NHD-0216K1Z-Nr

Specifications of NHD-0216K1Z-NS(RGB)-FBW

• Character Count X Line: 16 x 2
• Module Size (w X H X T): 80 mm x 36 mm x 13 mm
• Features: RGB Backlight
• Fluid Type: FSTN Negative
• Voltage Rating: 5 V
• Operating Temperature Range: - 20 C to + 70 C
• Backlight Type: LED RGB
• Display Mode: Transmissive
• Interface: Parallel
• Display Type: FSTN - Film Super-Twisted Nematic
• Number Of Digits/alpha: 32
• Outline L X W X H: 80.00mm x 36.00mm x 9.50mm
• Viewing Area: 64.50mm L x 16.40mm W
• Backlight: -
• Display Format: 16 x 2
• Character Size: 5.23mm H x 3.00mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 5.0V
• Dot Size: 0.56mm W x 0.61mm H
• Operating Temperature: -10°C ~ 50°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NHD-0216K1Z-NS(RGB)-FBW
Soldering Precautions:
Operation Precautions:
Limited Warranty
NEWHAVEN LCDs and modules are not consumer products, but may be incorporated by NEWHAVEN’S
customers into consumer products or components thereof, NEWHAVEN does not warrant that its LCDs and
components are fit for any such particular purpose.
1.
2.
3.
NEWHAVEN will not be responsible for any subsequent or consequential events or injury or damage to
any personnel or user including third party personnel and/or user. Unless otherwise agreed in writing
between NEWHAVEN and the customer, NEWHAVEN will only replace or repair any of its LCD which is
found defective electrically or visually when inspected in accordance with NEWHAVEN general LCD
inspection standard . (Copies available on request)
has been disregarded. Broken glass, scratches on polarizer mechanical damages as well as defects that
are caused accelerated environment tests are excluded from warranty.
the failures or defect.
3. Do not touch the connection terminals of the display with bare hand; it will cause disconnection or
4. The modules should be kept in anti-static bags or other containers resistant to static for storage.
5. Only properly grounded soldering irons should be used.
6. If an electric screwdriver is used, it should be grounded and shielded to prevent sparks.
7. The normal static prevention measures should be observed for work clothes and working
8. Since dry air is inductive to static, a relative humidity of 50-60% is recommended.
The liability of NEWHAVEN is limited to repair or replacement on the terms set forth below.
No warranty can be granted if any of the precautions state in handling liquid crystal display above
In returning the LCD/LCM, they must be properly packaged; there should be detailed description of
defective insulation of terminals.
benches.
1. Soldering should be performed only on the I/O terminals.
2. Use soldering irons with proper grounding and no leakage.
3. Soldering temperature: 280qC+10qC
4. Soldering time: 3 to 4 second.
5. Use eutectic solder with resin flux filling.
6. If flux is used, the LCD surface should be protected to avoid spattering flux.
7. Flux residue should be removed.
1. The viewing angle can be adjusted by varying the LCD driving voltage Vo.
2. Since applied DC voltage causes electro-chemical reactions, which deteriorate the
3. Driving voltage should be kept within specified range; excess voltage will shorten display
4. Response time increases with decrease in temperature.
5. Display color may be affected at temperatures above its operational range.
7.
6.
display, the applied pulse waveform should be a symmetric waveform such that no DC
component remains. Be sure to use the specified operating voltage.
life.
and humidity could cause polarization degradation, polarizer peel-off or generate
bubbles.
Keep the temperature within the specified range usage and storage. Excessive temperature
For long-term storage over 40qC is required, the relative humidity should be kept below
60% and avoid direct sunlight.
21
Newhaven Display
2006-12-4