CBT-90-B-C11-KJ301 Luminus Devices, CBT-90-B-C11-KJ301 Datasheet - Page 8

• Manufacturer Part Number: CBT-90-B-C11-KJ301
• Description: LED Arrays, Modules and Light Bars Blue 455-465nm 350lm @ 13.5A
• Manufacturer: Luminus Devices

Specifications of CBT-90-B-C11-KJ301

• Product: LED Modules
• Illumination Color: Blue
• Supply Voltage: 3.9 V
• Led Size: 3 mm x 3 mm
• Supply Current: 13.5 A
• Wavelength: 464 nm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Reference Optical and Electrical Characteristics (T
Common Characteristics
Emitting Area
Emitting Area Dimensions
Dynamic Resistance
Thermal Coefficient of Photometric Flux
Thermal Coefficient of Radiometric Flux
Thermal Coefficient of Junction Voltage
Absolute Maximum Ratings
Maximum Current
Maximum Junction Temperature
Storage Temperature Range
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
Note 8:
Note 9:
Note 10: Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. See
Note 11: Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information.
Note 12: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage
Listed drive conditions are typical for common applications. PhlatLight devices can be driven at currents ranging from <1 A to 13.5 A
For reference only.
All ratings are based on operation with a constant heat sink temperature T
and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction tem-
perature desired to meet application lifetime requirements.
Current Density of 2.5 A/mm
Unless otherwise noted, values listed are typical. Devices are production tested and specified at 13.5 A. Values at 3.2 A and 22.5 A are
for reference only.
Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power
level. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact
Luminus.
Minimum and Maximum Dominant Wavelengths are based on typical values +/- 5nm for Red, +/- 8nm for Green and +/- 6nm for Blue.
In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1.
Luminus PhlatLight LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is spec-
ified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents will result in a reduction
of device life ime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction tempera-
ture. Refer to the lifetime derating curves for further information. In pulsed operation, rise time from 10-90% of forward current
should be larger than 0.5 microseconds.
charts on pg 7 for further information.
the eye.
9
CBT-90
10
Product Datasheet
2
. Rated at 50% duty cycle and Pulsed operation frequency of f>360Hz;
Symbol
Symbol
T
Ω
jmax
dyn
www.luminus.com
heat sink
-40/+100
3.0x3.0
-0.96
-0.52
Red
0.03
Red
-1.3
125
9.0
27
= 40 ºC)
hs
=40ºC. See Thermal Resistance section for T
© 2011 Luminus Devices, Inc. - All Rights Reserved
1
-40/+100
3.0x3.0
Green
Green
-0.18
-0.20
0.04
-4.6
150
9.0
27
DC
=
-- -
T
t
-40/+100
3.0x3.0
-0.007
Blue
-0.17
Blue
0.02
-3.5
150
9.0
27
t
T
PRELIMINARY
hs
definition.
mm
mV/ºC
Unit
Unit
mm
%/ºC
%/ºC
ºC
ºC
Ω
A
Page 8
x
mm
11
2