USBFTV2PE1N Amphenol PCD, USBFTV2PE1N Datasheet - Page 30

• Manufacturer Part Number: USBFTV2PE1N
• Description: CONN USB-A RCPT-RCPT SQ FLANGE
• Manufacturer: Amphenol PCD
• Series: USBF TVr
• Type: Panel Socketr

Specifications of USBFTV2PE1N

• Convert From (adapter End): USB - A, Receptacle
• Convert To (adapter End): USB - A, Receptacle
• Mounting Type: Panel Mount, Screw Hole
• Features: Dust Tight, Waterproof
• Connector Type: USB - A
• Gender: Receptacle
• Number Of Contacts: 4
• Angle: Straight
• Application: Commercial
• Diameter, Mounting Hole: 0.128 "
• Finish, Housing: Nickel
• Flammability Rating: UL94-V0
• Housing Type: Metal
• Ip Rating: IP 67
• Material, Housing: Metal
• Mating Type: Threaded
• Primary Type: Ethernet
• Shell Size: 2PE
• Special Features: EMI Shielding
• Thickness, Panel: 0.031 "
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: APC1105

Can be used with most the USB cordset brands: No tools required!
Plug Assembly
1. Only if you need a full sealing (IP67): Install the white sticker around the
2. Insert the black O Ring around the front face of the USB A plug. This O
3. Insert the USB cordset into the metallic backshell
4. Insert the retention spacer laterally to the cable (this spacer is soft, in
5. Insert the friction ring laterally to the cable
6. Choose the right coding (2 positions) and insert the USB-A plug into the
7. Screw the backshell on the plug body. A wrench can be necessary to
Receptacle Assembly
Insert the USB module from the rear. Reference is main key.
Beware to have a coding compatible with the coding you used for
the plug: on front view, the white shapes in the USBs
must be on the same side.
To remove the USB module, insert
the removal tool USBF ODE from the
Front, and push back the module.
n
n
n
Accessories
Connector Type
6:
2:
7:
Shells Material & Finish
N:
G:
BZ: Marine bronze shell - ROHS compliant
IMPORTANT NOTE
The connection sealing is not done
by the black retention spacer (which
is sloted), but by the front face ORing
(see 2)
Assembly Instructions
plug, covering the 4 little holes of the overmolding
Ring will ensure connection sealing
order to adapt to different shapes of overmolding) and slide the over-
molding of the USB-A plug into this retention spacer
protective plug. Note at this step, the main key is used for polarization.
fully tighten it, and the connection to the receptacle can help
Metallic Caps
Panel Gasket for square
flange receptacle
(Thickness: 0,8 mm [.031]): JE15
Receptacle Insert removal tool: USBF ODE
Plug
Square Flange Receptacle
Jam Nut Receptacle
Aluminium shell - Nickel - ROHS compliant
Aluminium shell - Olive Drab Cadmium
USBF TVC
2
G
28
7a
1
3
5
7b
2
4
6