AT3020SEL1ZS-RV Kingbright Corp, AT3020SEL1ZS-RV Datasheet - Page 9

• Manufacturer Part Number: AT3020SEL1ZS-RV
• Description: LED High Power (> 0.5 Watts) 0.5W Red 618nm Water Clear 9 lm
• Manufacturer: Kingbright Corp

Specifications of AT3020SEL1ZS-RV

• Power Rating: 0.5 W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SPEC NO: DSAJ0166
APPROVED: WYNEC
Designing the Position of LED on a Board.
1.No twist/warp/bent/or other stress shall be applied to the board after mounting LED with
3.Do not split board by hand.Split with exclusive special tool.
4.If an aluminum circuit board is used,a large stress by thermal shock might cause a solder crack.
2.Depending on the position and direction of LED,the mechanical stress on the LED package can be changed.
solder to avoid a crack of LED package.
Refer to the following recommended position and direction of LED.
For this reason,it is recommended an appropriate verification should be taken before use.
Refer to the following figure.
Appropriate LED mounting is to place perpendicularly against the stress affected side
REV NO: V.5
CHECKED: Allen Liu
DATE: MAY/27/2010
DRAWN: Y.F.Lv
3.0x2.0mm SMD LED WITH CERAMIC SUBSTRATE
.
PAGE: 9 OF 10
ERP: 1212000054