MKT 1817-247-254-D Vishay, MKT 1817-247-254-D Datasheet - Page 4

• Manufacturer Part Number: MKT 1817-247-254-D
• Manufacturer: Vishay

Specifications of MKT 1817-247-254-D

• Tolerance (+ Or -): 5%
• Voltage: 250VDC/160VAC
• Temp Coeff (dielectric): PLYE
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 6.6mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 6mm
• Product Depth (mm): 2.5mm
• Product Length (mm): 7.5mm
• Lead Spacing (nom): 5mm
• Lead Diameter (nom): 0.5mm
• Operating Temp Range: -55C to 100C
• Capacitance: 4700pF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

MKT 1817
Vishay Roederstein
MOUNTING
Normal use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines
For detailed tape specifications refer to “Packaging Information”
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
•
•
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
•
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
4
For pitches ≤ 15 mm the capacitors shall be mechanically fixed by the leads
For larger pitches the capacitors shall be mounted in the same way and the body clamped
Product height with seating plane as given by “IEC 60717” as reference: h
Eccentricity
For technical questions, contact:
Metallized Polyester Film Capacitors
MKT Radial Potted Types
Not for new design
I
max.
= I + 0.3 mm
www.vishay.com/doc?28139
[e-mail]
b
max.
max.
.
= b + 0.4 mm
≤ h + 0.3 mm
Document Number: 26032
Revision: 04-Aug-09