EC2545TS16.000M-TR Ecliptek, EC2545TS16.000M-TR Datasheet
EC2545TS16.000M-TR
Specifications of EC2545TS16.000M-TR
Related parts for EC2545TS16.000M-TR
EC2545TS16.000M-TR Summary of contents
Page 1
... Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page RoHS EC25 45 TS -16.000M TR Load Drive Capability Low Drive Pin 1 Connection Duty Cycle Tri-State (High Impedance) 50 ± ...
Page 2
... MARKING 5.00 ORIENTATION ±0.15 1.60 ±0.20 Suggested Solder Pad Layout All Dimensions in Millimeters 2.0 (X4) 2.2 (X4) Solder Land 2.88 (X4) 1.81 All Tolerances are ±0.1 www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page 5.08 ±0. 1.4 ±01 3.68 ±0.15 PIN CONNECTION 1 Tri-State ...
Page 3
... L Note 4: Resistance value R is shown in Table 1. See applicable specification sheet for 'Load Drive Capability'. L Note 5: All diodes are MMBD7000, MMBD914, or equivalent. www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page Rise T W Time T Duty Cycle (%) = T ...
Page 4
... V Note 2: A low capacitance (<12pF), 10X attenuation factor, high impedance (>10Mohms), and high bandwidth (>300MHz) passive probe is recommended. Note 3: Capacitance value C includes sum of all probe and fixture capacitance. L www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page Supply Voltage (V ) Output ...
Page 5
... EIA 481A DIA 50 MIN DIA 20.2 MIN DIA 13.0 ±0.2 www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page DIA 1.5 +0.1/-0.0 8.0 ±0.1 1.5 MIN 0.3 ±0.05 A0* B0* K0* 22.4 MAX ...
Page 6
... Target Peak Temperature (T Target) P Time within 5°C of actual peak (t p Ramp-down Rate Time 25°C to Peak Temperature (t) Moisture Sensitivity Level Additional Notes www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page Ramp-up t Preheat S t 25°C to Peak Time (t) 3°C/second Maximum 150°C 175°C 200° ...
Page 7
... Maximum for 10 seconds Maximum, 2 times Maximum. (Temperatures shown are applied to body of device.) High Temperature Manual Soldering 260°C Maximum for 5 seconds Maximum, 2 times Maximum. (Temperatures shown are applied to body of device.) www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 10/10/2010 | Page Ramp-up t Preheat S t 25° ...