P11S1A0BGSY00103KA Vishay, P11S1A0BGSY00103KA Datasheet - Page 10

• Manufacturer Part Number: P11S1A0BGSY00103KA
• Description: POTENTIOMETER, 10K, LINEAR
• Manufacturer: Vishay
• Type: Potentiometerr
• Series: P11r

Specifications of P11S1A0BGSY00103KA

• Power Rating: 1W
• Resistance: 10kohm
• Tolerance (+ Or -): 10%
• Number Of Turns: 1Turn
• Technology: Cermet
• Mounting Style: Panel
• Termination Style: Solder Lug
• Operating Temp Range: -55C to 125C
• Failure Rate: Not Required
• Shaft Diameter (mm): 3.17mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 13.1mm
• Product Depth (mm): 12.5mm
• Temperature Coefficient: ±150
• Track Resistance: 10kohm
• Track Taper: Linear
• No. Of Turns: 1
• Resistance Tolerance: ± 20%
• Voltage Rating: 350V
• No. Of Gangs: 1
• Svhc: No SVHC (15-Dec-2010)
• Resistor Element: RoHS Compliant
• Tolerance: 10 %
• Taper: Audio
• Element Type: Cermet
• Shaft Type: Flatted / D
• Operating Temperature Range: - 55 C to + 125 C
• Product: Panel Mount Potentiometers
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

Document Number: 51031
Revision: 21-Feb-11
P11 OPTION: ROTARY SWITCH MODULES
MODULES: RS ON/OFF SWITCH
RSI CHANGEOVER SWITCH
The position of each module is free.
RS and RSI rotary switches are housed in a standard P11 module
size 12.7 mm x 12.7 mm x 5.08 mm (0.5" x 0.5" x 0.2"). They have
the same terminal styles as the assembled electrical modules.
An assembly can comprise 1 or more switch modules.
Switch actuation is described as seen from the shaft end.
D:means actuation in maximum CCW position
F:means actuation in maximum CW position
The switch actuation travel is 25° with a total mechanical travel of
300° ± 5° and electrical travel of electrical modules is 238° ± 10°.
Leads finish: Gold plated.
RDS SINGLE POLE SWITCH, NORMALLY OPEN
In full CCW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CW direction.
RSF SINGLE POLE SWITCH, NORMALLY OPEN
In full CW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CCW direction.
RSID SINGLE POLE CHANGEOVER
In full CCW position, the contact is made between 3 and 2 and
open between 3 and 1. Switch actuation (CW direction) reverses
these positions.
RSIF SINGLE POLE CHANGEOVER
In full CW position, the contact is made between 1 and 2 and
open between 1 and 3. Switch actuation (CCW direction)
reverses these positions.
ORDERING INFORMATION (First order only)
RSD
RSF
RSID
RSIF
RSID
Cermet (P11S) or Conductive Plastic Elements (P11A)
See also Application Note:
SPST: Single pole, open switch in CCW position - 2 pins
SPST: Single pole, open switch in CW position - 2 pins
SPDT: Single pole, changeover switch in CCW position - 3 pins
SPDT: Single pole, changeover switch in CW position - 3 pins
12.5 mm Modular Panel Potentiometer
For technical questions, contact:
www.vishay.com/doc?51001
ELECTRICAL DIAGRAM
Note
• Common
• Rotary switchs
• Current up to 2 A
• Actuation CW or CCW position
• Sealing IP60
SWITCH SPECIFICATIONS
Switching Power Maximum
Switching Current Maximum
Maximum Current Through Element
Contact Resistance
Dielectric
Strength
Maximum Voltage Operation
Insulation Resistance Between Contacts
Life at P
Minimal Travel
Operating Temperature
[e-mail]
max.
1
RSD
RSF
and
3
www.vishay.com/doc?52029
Terminal to Terminal
Terminal to Bushing
CCW POSITION
1
RSID
2
3*
Vishay Sfernice
CW POSITION
P11S, P11A
1*
RSIF
- 40 °C to + 85 °C
10 000 actuations
2
0.25 A 250 V 
0.5 A 30 V =
1000 V
2000 V
62.5 VA
www.vishay.com
15 VA =
100 m
3
250 V
10
30 V =
2 A
25°
6
M
RMS
RMS
10