ZDAE-15-P-OL2-146 ITT, ZDAE-15-P-OL2-146 Datasheet - Page 39

• Manufacturer Part Number: ZDAE-15-P-OL2-146
• Manufacturer: ITT
• Type: D-Subminiaturer

Specifications of ZDAE-15-P-OL2-146

• Number Of Contacts: 15POS
• Number Of Terminals: 15
• Plug / Receptacle: PIN
• Contact Plating: Gold Over Nickel
• Contact Pitch (mm): 2.77mm
• Body Orientation: Straight
• Mounting Style: Through Hole
• Number Of Ports: 1Port
• Number Of Contact Rows: 2
• Operating Temp Range: -55C to 105C
• Termination Method: Solder
• Current Rating: 5A
• Housing Material: Thermoplastic
• Contact Material: Brass
• Product Length (mm): 39.1mm
• Product Depth (mm): 12.55mm
• Lead Free Status / RoHS Status: Compliant

ABT-620 Semi-Automatic Crimper/Stripper
The ABT-620 Universal Cannon Crimper/Stripper is a pneumatic pow-
ered, microprocessor controlled machine. It is designed to semi-auto-
matically strip insulation from stranded or single conductor electrical
wire and attach a stamped and formed contact by crimping. The
machine will accommodate 34 thru 12 AWG wire. Primary application
of the machine is the termination of jacketed cable where the individ-
ual leads cannot be stripped on fully automated equipment. The ABT-
620 UCCS operates automatically upon insertion of a wire or it can be
switched over to foot pedal operation as desired.
Machine Strip/Crimp Rate: 1200+ per hour
Power Requirement: Electrical = 115 VAC, 60 Hz, 20 A
Insertion/Extraction Tools
D*A
CIET-D*A-20-24
980-0008-135
(20 - 24 AWG)
Hand - Crimp Tool
D*A Contacts
CCT-D*A-1
ZD HD (size 22 contacts)
CCT-22D 995-2000-022
ABT-607 Pneumatic Crimper
The ABT-607 is a pneumatic powered and controlled machine. It is
designed for customers with moderate volume. This machine is
designed to semi-automatically crimp stamped and formed contacts
onto pre-stripped stranded or single conductor electrical wire. This
machine will accommodate size 34 thru 12 AWG wire and is actuated
by the use of a footpedal.
Machine Crimp: 800 per hour
Power Requirements: Pneumatic = 100 psi, 2 cu. ft. per min.
Cannon ZD Connectors
995-2000-000
Pneumatic= 80 psi, 2cu. ft.per min.
CIET-D*A-24-26
980-0008-136
(24 - 26 AWG)
ZD-HD
CIET-22DF
980-0004-804
40
USA Tooling for ZD / D*A
Specifications and dimensions subject to change
ABT-620 UCCS
ABT-607
Dimensions shown in mm
www.ittcannon.com