DM53740-5005 ITT, DM53740-5005 Datasheet - Page 276

• Manufacturer Part Number: DM53740-5005
• Manufacturer: ITT
• Type: Contactr

Specifications of DM53740-5005

• Number Of Contacts: 1CoaxialPOS
• Number Of Terminals: 1
• Plug / Receptacle: PL
• Contact Plating: Gold Over Nickel
• Contact Pitch (mm): Not Requiredmm
• Body Orientation: Straight
• Mounting Style: Cable
• Number Of Ports: 1Port
• Number Of Contact Rows: Not Required
• Termination Method: Solder
• Housing Material: Not Required
• Product Length (mm): 26.34mm
• Lead Free Status / RoHS Status: Compliant

D Subminiature
ABT-607 Pneumatic Crimper
ABT-607
Products: D*A, MDSM, 75 Ohm Crimp Coax
ABT-620 UCCS Semi-Automatic Crimper/Stripper
ABT-620 UCCS
Products: D*A, MDSM
CBT-646 Vibra-Bowl Crimper
CBT-646
Products: D*MA
The ABT-607 is a pneumatic powered and controlled machine. It is designed for customers with
moderate volume. This machine is designed to semi-automatically crimp stamped and formed contacts
onto pre-stripped stranded or single conductor electrical wire. This machine will accomodate size 34 thru
12 AWG wire and is actuated by the use of a foot pedal.
Machine Crimp Rate: 800 per hour
Power Requirements: Pneumatic = 100 psi, 2 cu. ft. per min.
The ABT-620 Universal Cannon Crimper/Stripper is a pneumatic powered, microprocessor controlled
machine. It is designed to semi-automatically strip insulation from stranded or single conductor electrical
wire and attach a stamped and formed contact by crimping. The machine will accommodate 34 thru 12
AWG wire. Primary application of the machine is the termination of jacketed cable where the individual
leads cannot be stripped on fully automated equipment. The ABT-620 UCCS operates automatically upon
insertion of a wire or it can be switched over to foot pedal operation as desired.
Machine Strip/Crimp Rate: 1200+ per hour
Power Requirements: Electrical = 115 VAC, 60 Hz, 20 A
The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is
designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and
commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is
actuated automatically upon insertion of a pre-stripped stranded or single conductor wire.
Machine Crimp Rate: 1300+ per hour
Power Requirements: Electrical = 115 VAC, 60 Hz, 5 A
Pneumatic = 80 psi, 3 cu. ft. per min.
Pneumatic = 85 psi, 2 cu. ft. per min.
Lease Tooling
Dimensions are shown in mm (inch)
Dimensions subject to change
275