192039-5 TE Connectivity, 192039-5 Datasheet - Page 15

• Manufacturer Part Number: 192039-5
• Manufacturer: TE Connectivity
• Type: Contactr

Specifications of 192039-5

• Gender: M
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Beryllium Copper
• Voltage Rating Max: 600VAC
• Mounting Style: Through Hole
• Termination Method: Solder
• Contact Plating: Silver
• Louver Height (mm [in]): 0.86 [0.034]
• Preformed: No
• Form Type: Bridge
• Band Material: Beryllium Copper
• Band Plating: Silver
• Product Name: LAIII
• Material Thickness (mm [in]): 0.152 [0.006]
• Diameter, Min. (mm [in]): 25.40 [1.000]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Suggested Current Limit (per Inch) (a): 150
• Lead Free Status / RoHS Status: Compliant

14
The AMPOWER Multi Pin Plus
Connector is manufactured from a
modular mold that allows the finished
housing to be molded into thousands
of different contact configurations.
Standard modules are offered in 2, 3, 4
and 8 positions with contact amperages
ranging from signal to 150 amps. Pin
contacts can be installed into the Plug
Housing or the Receptacle Housing.
Socket contacts can be installed into the
Plug Housing or the Receptacle
Housing. Any combination of the mod-
ules could be selected and molded into
a one-piece housing from 1" to 6" long.
Custom modules can be designed and
molded to fit many other AMP contacts.
Dimensions shown below are the
approximate width of each module.*
The connector can be used in blindmate
drawer, wire-to-wire, wire-to-board, and
board-to-board applications.
Product Specification
108-1809
Dimensions are shown for reference
purposes only.
End Module
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR 39825
2-Position
9 mm Contact
Module
4-Position
3 mm Contact
Module
8-Position
Multimate Module
(Signal/Size 16
Contact)
High Current Products
AMPOWER Multi Pin Plus Connector
*For example: Using both end modules (always required) and a 2-position 9 mm contact module, a 4-position 3 mm
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets are
metric equivalents.
contact module, and two (2) 8-position signal/size 16 contact modules would produce a connector approximately
2.402 [61.0] in length (.492 [12.5] x 2 + .787 [20.0] +.315 [8.0] + .158 [4.0] x 2).
End Module
2-Position
9 mm Contact
Module
Spacer
3-Position
3 mm
AC Contact
Module
4-Position
3 mm Contact
Module
Specifications subject to change.
Spacer
End Module
3-Position
3 mm
AC Contact
Module
Plug
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Receptacle
8-Position
Multimate Module
(Signal/Size 16 Contact)
Catalog 65141
Revised 4-01
End
Module