RTD-75-L-01 TE Connectivity, RTD-75-L-01 Datasheet - Page 3

• Manufacturer Part Number: RTD-75-L-01
• Manufacturer: TE Connectivity
• Type: TNCr

Specifications of RTD-75-L-01

• Gender: PL
• Body Style: Right Angle
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 105C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass
• Body Material: Brass/BeCu
• Impedance: 75Ohm
• Product Type: Connector - RF
• Weatherproof: No
• Solder Terminal: Without
• Dielectric Material: PTFE
• Coupling Nut Material: Brass
• Panel Mount Retention: Without
• Connector Impedance (?): 75
• Coaxial Cable Termination Type: Solder
• Dielectric O.d. Max. (mm [in]): 7.30 [0.287]
• Conductor O.d. (mm [in]): 2.45 [0.096]
• Center Contact Plating: Gold
• Center Contact Material: Brass
• Shield O.d. (min.) (mm [in]): 4.10 – 9.50 [0.161 – 0.375]
• Coaxial Cable Type (rg/u Or Mfg.): 11, 12, 144, 216, 59, 6
• Government/industry Qualification: No
• Rohs/elv Compliance: ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was ELV compliant
• Operating Temperature (max.) (°c): 150
• Applies To: Coaxial Cable
• Lead Free Status / RoHS Status: Compliant

Product Characteristics
Material
Typical Performance
Electrical Performance
Part Selection Process
1. From Product Options and Part Numbering System on page 8-56, select the connector style you need
2. From the tables that follow, find the appropriate table for the connector style you selected.
3. From the appropriate table, select the connector part number based on the RG cable type or
Catalog 1654025
Revised 12-04
www.tycoelectronics.com
Center contact
Dielectric insulator
Transition
Connector body
Solder and flux
Braided shield
Insulation sleeve
Strain relief/sealing sleeve
Dielectric withstand voltage
Insulation resistance
Temperature rating
Contact resistance-straight
Contact resistance — right-angle
Cable retention force
Voltage rating
Connector durability
Nominal impedance
Frequency range
(BNC or TNC, plug or jack, male or female contacts).
Raychem cable part number. For cable types not shown use the cable dimensions.
Note: The cable dimensions in each table are keyed to the diagram below.
D
E
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
F
Coaxial Cable Termination
RF One-Step BNC/TNC Connectors
G
Gold-plated beryllium copper (female)
Gold-plated brass (male)
PTFE
Silver-plated brass
Nickel-plated brass
Sn63Pb37, RMA flux
Tin-plated copper wire per ASTM B3
Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride, transparent blue
Radiation-crosslinked, heat-shrinkable modified polyolefin with adhesive, black
1500 V
5000 megohms
-55˚C to 150˚C [-67˚F to 302˚F]
Inner = 1.5 milliohms, outer = 1.0 milliohm
Inner = 2.5 milliohms, outer = 1.5 milliohms
295N (66 lb) to 822N (196 lb)
500 V RMS
500 mating cycles minimum
50 and 75 ohms
Up to 2.8 GHz
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
(Continued)
Insulation
Sleeve
Solder
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Shield
Transition
Insulation Sleeve
and Solder
Center
Contact
Dielectric
Insulator
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Connector
Body
8-57
8