5750833-1 TE Connectivity, 5750833-1 Datasheet - Page 3

• Manufacturer Part Number: 5750833-1
• Description: SCSI CONNECTOR, PLUG, 26POS, IDC/IDT
• Manufacturer: TE Connectivity
• Type: SCSIr
• Series: Amplimite 0.050r

Specifications of 5750833-1

• Number Of Terminals: 26
• Termination Method: IDT
• Body Orientation: Straight
• Gender: PL
• Number Of Ports: 1Port
• Pitch (mm): 1.27mm
• Number Of Contacts: 26POS
• Contact Plating: Gold Over Nickel
• Housing Material: Polyester
• Contact Material: Phosphor Bronze
• Mounting Style: Cable
• Operating Temp Range: -55C to 85C
• Current Rating (max): 1/ContactA
• Connector Type: SCSI
• No. Of Contacts: 26
• Contact Termination: IDC / IDT
• Connector Mounting: Cable
• Rohs Compliant: Yes
• Product Type: Connector
• Wire/cable Type: Round Jacketed Cable
• Mating Connector Lock: Without
• Detent: Without
• Rails: Without
• Termination Cover: With
• Product Series: Slimline
• Termination Method To Wire/cable: IDC
• Color: Black
• Shell Material: Steel
• Bracket Material: Zinc
• Panel Mount Retention: Without
• Bracket Plating: Nickel over Copper
• Shielded: Yes
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 26
• Wire Range (mm [awg]): 0.08-0.09² [28]
• Shell Plating: Tin over Copper
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable
• Lead Free Status / RoHS Status: Compliant

3.6.
Rev C
Contact retention.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
NOTE
Product Qualification and Requalification Test Sequence
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet the requirements of
additional tests as specified in the Test Sequence in Figure 2.
(a) See paragraph 4.1.A.
(b) Numbers indicate sequence in which tests are performed.
Examination of product
Termination resistance
Insulation resistance
Dielectric withstanding voltage
Solderability
Vibration
Physical shock
Durability
Contact retention
Thermal shock
Humidity-temperature cycling
Temperature life
Test or Examination
Contacts shall not dislodge.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
Figure 2
1,7
2,6
1
4
5
3
Test Sequence (b)
Test Group (a)
1,7
2,6
2
3
4
5
1,8
2,6
3,7
3
9
4
5
TE Spec 109-30.
Apply axial load off 100 grams to
contacts in vertical direction and
hold for 30 seconds minimum.
TE Spec 109-22.
Subject mated samples to 5 cycles
between -40 and 85° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10
cycles between 25 and 65° C at
95% RH. Final measurements shall
be taken during recovery period.
TE Spec 109-43.
Subject mated samples to
temperature life at 85° C for 500
hours.
1,3
4
2
Procedure
108-1393
3 of 6