BFC238310104 Vishay, BFC238310104 Datasheet - Page 15

• Manufacturer Part Number: BFC238310104
• Description: Capacitor,Polypropylene,100nF,400VDC,5-% Tol,5+% Tol
• Manufacturer: Vishay
• Type: Pulser

Specifications of BFC238310104

• Tolerance (+ Or -): 5%
• Voltage: 400VDC/200VAC
• Temp Coeff (dielectric): PLYP
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 13.5mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 13.5mm
• Product Depth (mm): 7mm
• Product Length (mm): 17.5mm
• Lead Spacing (nom): 15mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 105C
• Capacitance: .1uF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines
For detailed tape specifications refer to “Packaging Information”
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
•
•
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
•
•
Storage Temperature
• Storage temperature: T
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28124
Revision: 03-Mar-10
For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads
For larger pitches the capacitors shall be mounted in the same way and the body clamped
Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
Product height with seating plane as given by “IEC 60717” as reference: h
AC and Pulse Double Metallized Polypropylene
stg
Film Capacitors MMKP Radial Potted Type
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
Eccentricity
For technical questions, contact:
I
max.
= I + 0.3 mm
www.vishay.com/docs?28139
[e-mail]
b
max.
max.
.
= b + 0.3 mm
≤ h + 0.3 mm
Vishay BCcomponents
MMKP 383
www.vishay.com
201