EFO-JM3385E5 Panasonic - ECG, EFO-JM3385E5 Datasheet - Page 2

• Manufacturer Part Number: EFO-JM3385E5
• Description: RESONATR CERM W/CAP 33.86MHZ SMD
• Manufacturer: Panasonic - ECG
• Series: EFO-JMr
• Type: Ceramicr

Specifications of EFO-JM3385E5

• Frequency: 33.868MHz
• Features: Built in Capacitor
• Frequency Stability: ±0.2%
• Frequency Tolerance: ±0.5%
• Capacitance: 10pF
• Operating Temperature: -20°C ~ 80°C
• Mounting Type: Surface Mount
• Package / Case: 3-SMD, Non-Standard
• Size / Dimension: 0.173" L x 0.142" W (4.40mm x 3.60mm)
• Height: 0.047" (1.20mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EFOJM3385E5; PX338JTR

Fig. 1
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
4 Soldering (Refl ow)
(1) Follow the soldering instructions given in the
(2) The Ceramic Resonators are designed for
(3) Too high of a soldering temperature and/or too
• Preheating: 175 °C for 60 to 120 seconds
• Soldering Temperature: 220 °C for 20 seconds
• Peak Soldering Temperature: 250 °C max.
250
220
175
ceramic data sheet specifi cations.
“Reflow Soldering”
large of a temperature gradient, such as rapid
heating or cooling, may cause electrical failure
and/or mechanical damage.
max.
Recommended Soldering Temperature -Time
profi le (Refl ow Soldering)
Preheating Zone
60 to 120 sec
Time (sec)
Soldering Zone
20 sec max.
Peak Temp.:
250 °C max.
gradual
cooling
– EC176 –
5 Soldering Flux
6 Post Soldering Cleaning
7 Operating and Storage Conditions
8 Long Term Storage
Product performance may be affected by fl ux residue,
which may result in deterioration or failure or the
ceramic resonator.
Liquid cleaning is prohibited.
The Ceramic Resonators should not be operated
and/or stored under the following environmental
conditions;
a) Direct exposure to water or salt water
b) Direct exposure to sunlight
c) Under conditions of dew formation
d) Corrosive atomospheres such as hydrogen
The Ceramic Resonators should not be stored
under severe conditions of high temperatures
and high humidities.
Store them indoors under 40 °C max. and 75 %
RH max. Use them within one year and check
the solderability before use.
sulfi de, sulfuric acid, chlorine and ammonia
Ceramic Resonators, Chip Type
00 Sep. 2008