250-04050 Parallax Inc, 250-04050 Datasheet - Page 9

• Manufacturer Part Number: 250-04050
• Description: RESONATOR CERAMIC 4MHZ 3-SIP
• Manufacturer: Parallax Inc
• Type: Ceramicr

Specifications of 250-04050

• Frequency: 4MHz
• Features: Built in Capacitor
• Frequency Stability: ±0.2%
• Frequency Tolerance: ±0.5%
• Capacitance: 47pF
• Operating Temperature: -20°C ~ 80°C
• Mounting Type: Through Hole
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Package / Case: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

2
!Note
!Note
CSTCC_G
Please do not apply excess mechanical stress to the
component and terminals during soldering.
The component is recommended for use with placement
machines which employ optical placement capabilities.
The component might be damaged by excessive
mechanical force. Please make sure to evaluate by
using placement machines before going into mass
production. Do not use placement machines which
utilize mechanical positioning. Please contact Murata
for details beforehand.
CSTCR_G/CSTCE_G/CSTCE_V/CSTCG_V
Please do not apply excess mechanical stress to the
component and terminals during soldering.
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
The component is recommended for use with placement
machines which employ optical placement capabilities.
The component might be damaged by excessive mechanical
force. Please make sure to evaluate by using placement
machines before going into mass production. Do not use
placement machines which utilize mechanical positioning.
Please contact Murata for details beforehand.
CSTCC_G_A/CSTCR_G_B/CSTCE_G_A/CSTCE_V_A
Please do not apply excess mechanical stress to the
component and terminals during soldering.
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
CSTCV_X_Q/CSACV_X_Q
Please do not apply excess mechanical stress to the
component and terminals during soldering.
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
The component is recommended for use with placement
10
MHz Chip Type Notice
Notice (Storage and Operating Conditions)
Notice (Storage and Operating Conditions)
Notice (Storage and Operating Conditions)
Notice (Storage and Operating Conditions)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
1. CSTCC_G (2.00MHz-3.49MHz)
2. CSTCC_G (3.50MHz-10.0MHz)
The component is recommended for use with placement
machines which employ optical placement capabilities.
The component might be damaged by excessive mechanical
force. Please make sure to evaluate by using placement
machines before going into mass production. Do not use
placement machines which utilize mechanical positioning.
Please contact Murata for details beforehand.
machines which employ optical placement capabilities.
In some cases, placement machines which utilize
mechanical positioning may apply excessive mechanical
force which might result in damage to the ceramic
resonator. Please contact Murata before mounting this
product using placement machines which use mechanical
positioning.
Conformal coating or washing of the component is
not acceptable because it is not hermetically
sealed.
Conformal coating of the component is acceptable.
However, the resin material, curing temperature,
and other process conditions should be evaluated
to confirm that stable electrical characteristics
are maintained.
P16E15.pdf 04.8.27