3-1415353-1 TE Connectivity, 3-1415353-1 Datasheet - Page 14

• Manufacturer Part Number: 3-1415353-1
• Description: RELAY SAFETY 4PST 8A 24VDC
• Manufacturer: TE Connectivity
• Series: SR6 D/M, SCHRACKr

Specifications of 3-1415353-1

• Contact Form: 4PST (3 Form A, 1 Form B)
• Contact Rating (current): 8A
• Switching Voltage: 400VAC - Max
• Turn On Voltage (max): 18 VDC
• Turn Off Voltage (min): 2.4 VDC
• Relay Type: Safety
• Coil Type: Non Latching
• Coil Current: 50mA
• Coil Voltage: 24VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SR6M4024

NAME
Department:
RPG D&E Appl
4 General data
4.1
4.1.1
4.1.2
4.2.
4.2.1
4.2.2
4.3
4.3.1
4.3.2
4.4
4.5
4.5.2
4.5.3
4.8
4.10
Product data, technical parameters, test conditions and processing information only to be used together with the ‘Definitions’ section at
http://relays.tycoelectronics.com/schrack/pdf/definitions.pdf
©Tyco Electronics AMP
4.5.1
4.6
4.7
4.9
Customer drawing
Product Specification
Forcibly guided relay SR6
Operate times at + 23 ° C (cold coil); applied c oil
voltage = U
last close of a NO contact (incl. bounce time)
max. bounce time of the NO contacts
Operate times under special conditions
Operate time at +70 °C (warm coil); applied c oil
voltage = 90% U
last close of a NO contact (incl. bounce time)
Operate time at - 40 ° C (cold coil); applied coil
voltage = U
last close of a NO contact (incl. bounce time)
Release times at + 23 ° C (cold coil); no parall el
diode; applied voltage = U
last close of a NC contact (incl. bounce time)
max. bounce time of the NC contacts
Maximum switching rate
at rated load / minimum load
Ambient temperatures
Approved ambient temperature range acc.
IEC 61810-1
Terms for use below - 25° C amb. temperature
Terms for use above 70°C ambient temperature
(e.g. self heating in small enclosures)
Protection class according IEC61810-1
Mechanical endurance
Soldering and processing hints
Preheating temperature / max. duration
Soldering / max. duration
Recommended type of soldering flux
PCB cleaning
Mounting position
Weight
NOM
NOM
NOM
Nom
Drawer:
Knut Dankert 24.06.2010
DWG NO:
OPTIONAL NO
max. 100 ° C / 30 s (measured on PCB surface)
1200mW coil version
dized conditions. Application note SR6_AN_01
IEC 61810 can only be applied under standar-
2158003
SR6_Spec
For use at – 40° C ... –25° C do not exceed the
Relay is not qualified for any type of washing
max. operating voltage of 120 % U
No condensing or freezing allowed
must be applied in all other cases.
15 ms
50 ms
45 ms
16 ms
13 ms
4 ms
all types of ‘No-clean flux
10,000,000 operations
Approved:
Frank Liebusch 05.07.2010
360 h
-25 ° C ... + 70 ° C
max. 260 ° C / 5 s
processes !
-1
RT III
30 g
/ 18,000 h
any
800mW coil version
-1
SCHRACK
20 ms
60 ms
50 ms
35 ms
30 ms
6 ms
Page 14 of 19
nom
REVISION
A1