SSEW-100D-SS-G Quatech, SSEW-100D-SS-G Datasheet - Page 2

• Manufacturer Part Number: SSEW-100D-SS-G
• Description: WiFi / 802.11 Modules & Development Tools Wireless Device Sevr 1 port RS-232 802.11
• Manufacturer: Quatech

Specifications of SSEW-100D-SS-G

• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232
• Modulation: FSSS
• Security: WEP
• Output Power: 3.5 W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SPECIFICATIONS
LAN interface
10/100 Base T (IEEE 802.3) auto-negotiation,
auto MDI/MDIX and RJ-45 Ethernet connector
Wireless Specifications
Technology: IEEE 802.11b DSSS, WiFi Compliant
Frequency:
Channels:
Data Rates Supported: 11, 5.5, 2, 1 Mbps
RF Power: 65 mW (Typical)
Sensitivity:
Security: WEP standard encryption, 64/128-bit
WPA encryption available soon
Antenna: 2.2 dBi Rubber Duck Antenna, supplied
and attached to RP-SMA bulkhead connector
Serial interface (RS-232 or RS-232/422/485
Each port is a fully independent asynchronous
DTE serial port, with:
Speed:
Serial port supports data transfer speeds of
up to 921.6 Kbps, depending on flow control
protocols used, cable length and condition,
and other factors
Certifications
FCC, Industry Canada, CE
2.4 – 2.4835 GHz (US/Can/Europe/Japan)
2.471-2.497 Ghz (Japan)
USA & Canada: 11 channels
Europe: 13 channels
Japan: 14 channels
France: 4 channels
-82 dBm @ 11Mbps, -86 dBm @ 5.5 Mbps
-88 dBm @ 2 Mbps and -90dBm @ 1 Mbps
SSEW-100D
SSEW-100D-5V
SSEW-400D
DSEW-100D
DSEW-100D-5V
DSEW-400D
Model
Full modem control
Hardware flow control
Optional 10-pin RJ-45 adapters for
DB-9M connections are available
Ports
1
1
1
2
2
2
RS-232
RS-232 w/+5V
RS-232/422/485
RS-232
RS-232 w/+5V
RS-232/422/485
Interface
)
Serial Connectors
DB-9 Male, External View
Signal Information:
Surge Suppression Option
(Standard on 5V Models)
Surge suppressor is capable of sustaining up
to 40-A peak, 8 x 20-µs transient surges, a
clamping voltage of 30V (RS-232 mode) or
15.5V (RS-422/485 mode), and a peak energy
dissipation of 0.1 Joules
Protocols and software
Management: UDP, TCP/IP, HTTP, DHCP,
Initial IP address configuration: DHCP, static IP
set within the Installation Wizard or a custom
UDP datagram utility (with command line inter-
face) for unattended installations
Quatech provides several ways to manage,
monitor and configure wireless device servers
after installation:
Communication modes: Normal, Tunneling,
Raw TCP, Auto TCP, Raw UDP or Intellisock
TCP socket services
2-wire mode supported, see owner’s manual
v
v
v
v
RS-232
Windows® Device Manager (Quatech
Device Manager in Windows NT)
On-board HTML pages accessible from
a standard web browser
Simple Network Management Protocol
(SNMP)
Intellisock™ TCP socket services
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
ARP, SNMP
DB-9
Pin #
5675 Hudson Industrial Parkway, Hudson, OH 44236
1.800.553.1170
1
2
3
4
5
6
7
8
9
4 wire mode
RS-422/485
AuxIn-
RxD+
TxD+
AuxOut-
GND
RxD-
AuxOut+
AuxIn+
TxD-
www.quatech.com
OS support
Device drivers provided for Windows NT,
Windows 2000, Windows XP, and Linux
Raw TCP, Raw UDP, Tunneling, AutoTCP and
Intellisock
Please check Quatech’s website for the latest
O/S driver support information
Power Supply
+5V, 2A (10 W) max DC, with auto-sensing
AC adapter provided for 100VAC–240VAC,
50Hz–60Hz operation
Typical power consumption: +5V, 0.7A(3.5W)
Hardware
Conexant Prism™ 3 Wireless Chipset
CPU: Freescale™ PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB (FLASH is field
upgradeable)
+5V models limited to 500mA max current
draw per port (fuse-protected)
Environment
Operating: 0° C to 70° C
Storage: –40° C to 70° C
Relative Humidity: 10% to 90% non-condensing
Dimensions
Length: 4.69” (11.91 cm)
Width: 3.33” (8.46 cm)
Depth: 1.18” (2.99 cm)
Weight: 15.1 oz. (428.0 g)
Accessories
Surge Suppression
DB-9 to RJ-45 Adapters
International Power Cords
DIN Rail Mounting Kit
RS-422 & 485 Termination Blocks
Freescale and the Freescale Enabled logo are
trademarks of Freescale Semiconductor Inc.
PowerPC is a registered trademark of IBM Corporation
and is used under license.
Microsoft, Windows and the Windows logo are
registered trademarks of Microsoft Corporation.
DPAC Technologies is a trademark of DPAC
Technologies, Inc.
Prism is a trademark of Conexant Systems, Inc.
Intellisock is a trademark of Quatech, Inc.
TM
modes are O/S independent
Rev 1.0, 03.10.05