787415-1 TE Connectivity, 787415-1 Datasheet - Page 3

• Manufacturer Part Number: 787415-1
• Description: HDR ASY,RA,RKEY,STR TAIL,10.8V
• Manufacturer: TE Connectivity
• Type: Batteryr

Specifications of 787415-1

• Gender: HDR
• Body Orientation: Right Angle
• Housing Material: Liquid Cryst Polymer
• Number Of Contacts: 5POS
• Number Of Ports: 1Port
• Number Of Terminals: 5
• Pitch (mm): 5mm
• Contact Material: Brass
• Operating Temp Range: -30C to 70C
• Mounting Style: Through Hole
• Termination Method: Solder
• Contact Plating: Tin-Lead
• Product Height (mm): 6.8mm
• Product Length (mm): 35.5mm
• Rohs Compliant: NO
• Product Type: Connector
• Connector Type: Header
• Type Of Connector: Battery Interconnect
• Mount Angle: Right Angle
• Pcb Mount Retention: Without
• Mounting Holes: Without
• Mount: Printed Circuit Board
• Pcb Mount Style: Through Hole
• Voltage (vac): 10.8
• Number Of Positions: 5
• Centerline (mm [in]): 5.00 [0.197]
• Voltage Key: Right Hand
• Contact Type: Blade
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Tin-Lead
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Lead Free Status / RoHS Status: Not Compliant

Contact retention.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Rev B
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
Contacts shall not dislodge from
connector housing.
8 Newtons maximum per contact.
1 Newton minimum per contact.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-30.
Apply load of 10 Newtons to
contacts.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples a distance of 3mm for
mating orientation 1 and 5mm for
mating orientation 2 from point of
initial contact at maximum rate of
1.5mm per second.
See Figure 6.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples at maximum rate of 1.5mm
per second.
TE Spec 109-22.
Subject mated samples to 25 cycles
between -30 and 105° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 480
hours.
Procedure
108-1501
3 of 8