ADG1436YRUZ Analog Devices Inc, ADG1436YRUZ Datasheet - Page 12

• Manufacturer Part Number: ADG1436YRUZ
• Description: +/-15V Quad SPST With Ron Max = 2 Ohm
• Manufacturer: Analog Devices Inc
• Series: iCMOS®r
• Type: Analog Switchr

Specifications of ADG1436YRUZ

• Function: Switch
• Circuit: 2 x SPDT
• On-state Resistance: 3.5 Ohm
• Voltage Supply Source: Dual, Single, Dual Supply
• Voltage - Supply, Single/dual (±): ±5V, 12V, ±15V
• Current - Supply: 170µA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP (0.173", 4.40mm Width)
• Multiplexer Configuration: Dual SPDT
• Number Of Inputs: 2
• Number Of Outputs: 4
• Number Of Channels: 2
• Analog Switch On Resistance: 4@±5VOhm
• Package Type: TSSOP
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (min): 5V
• Single Supply Voltage (typ): 9/12/15V
• Single Supply Voltage (max): 16.5V
• Dual Supply Voltage (min): ±4.5V
• Dual Supply Voltage (typ): ±5/±9/±12/±15V
• Dual Supply Voltage (max): ±16.5V
• Mounting: Surface Mount
• Pin Count: 16
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4381317

ADG1436
TERMINOLOGY
I
The positive supply current.
I
The negative supply current.
V
The analog voltage on Terminal D and Terminal S.
R
The ohmic resistance between Terminal D and Terminal S.
R
Flatness that is defined as the difference between the maximum
and minimum value of on resistance measured over the
specified analog signal range.
I
The source leakage current with the switch off.
I
The drain leakage current with the switch off.
I
The channel leakage current with the switch on.
V
The maximum input voltage for Logic 0.
V
The minimum input voltage for Logic 1.
I
The input current of the digital input.
C
The off-switch source capacitance, which is measured with
reference to ground.
DD
SS
S
D
D
INL
ON
FLAT(ON)
S
D
INL
INH
, I
(Off)
(Off)
, V
(Off)
, I
S
(On)
INH
S
Rev. A | Page 12 of 16
C
The off-switch drain capacitance, which is measured with
reference to ground.
C
The on-switch capacitance, which is measured with reference
to ground.
C
The digital input capacitance.
t
The delay time between the 50% and 90% points of the digital
input and switch on condition when switching from one
address state to another.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
TRANSITION
D
D
IN
, C
(Off)
S
(On)