CY25814SXCT Cypress Semiconductor Corp, CY25814SXCT Datasheet - Page 3

• Manufacturer Part Number: CY25814SXCT
• Description: IC,Miscellaneous Clock Generator,SOP,8PIN,PLASTIC
• Manufacturer: Cypress Semiconductor Corp
• Type: Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generatorr

Specifications of CY25814SXCT

• Pll: Yes
• Input: Clock, Crystal, Resonator
• Output: Clock
• Number Of Circuits: 1
• Ratio - Input:output: 1:1
• Differential - Input:output: No/No
• Frequency - Max: 128MHz
• Divider/multiplier: Yes/Yes
• Voltage - Supply: 2.97 V ~ 3.63 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Frequency-max: 128MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Pinouts
Table 1. Pin Definition
Functional Description
The CY25811/12/14 products are Spread Spectrum Clock
Generator (SSCG) ICs used for the purpose of reducing electro-
magnetic interference (EMI) found in today’s high speed digital
electronic systems.
The devices use a Cypress proprietary phase-locked loop (PLL)
and Spread Spectrum Clock (SSC) technology to synthesize and
modulate the frequency of the input clock. By frequency
modulating the clock, the measured EMI at the fundamental and
harmonic frequencies is greatly reduced.
This reduction in radiated energy significantly reduces the cost
of complying with regulatory agency requirements and improves
time to market without degrading system performance.
The input frequency range is 4 to 32 MHz and accepts clock,
crystal and ceramic resonator inputs. The output clock can be
selected to produce 1x, 2x, or 4x multiplication of the input
frequency with Spread Spectrum Frequency Modulation.
The use of 2x or 4x frequency multiplication eliminates the need
for higher order crystals and enables you to generate up to
128 MHz Spread Spectrum Clock (SSC) by using only first order
crystals. This reduces the cost while improving the system clock
accuracy, performance, and complexity.
Document Number: 38-07112 Rev. *I
Pin No.
1
2
3
4
5
6
7
8
Xin/CLK
SSCLK
FRSEL
XOUT
Name
VSS
VDD
S1
S0
Type
Crystal, Ceramic Resonator or Clock Input Pin
Power Supply Ground.
Digital Spread% Control Pin. 3-Level input (H-M-L). Default = M.
Digital Spread% Control Pin. 3-Level input (H-M-L). Default = M.
Spread Spectrum Output Clock.
Input Frequency Range Selection Digital Control Input. 3-Level input (H-M-L). Default = M.
Positive Power Supply.
Crystal or Ceramic Resonator Output Pin.
Figure 1. Pin Configuration – 8 Pin SOIC/TSSOP
XIN/CLKIN
VSS
S1
S0
1
2
3
4
CY25811
CY25812
CY25814
Select the Center Spread or Down Spread frequency modulation
based on four discrete values of Spread % for each Spread
mode with the option of a Non Spread mode for system test and
verification purposes.
The CY25811/12/14 products are available in an 8 pin SOIC -150
mil package with a commercial operating temperature range of
0 to 70°C and industrial temperature range of –40 to 85°C. Refer
to CY25568 for multiple clock output options such as modulated
and unmodulated clock outputs or power down function.
Input Frequency Range and Selection
The CY25811/12/14 input frequency range is 4 to 32 MHz. This
range is divided into three segments and controlled by a 3-level
FRSEL pin as given in
Table 2. Input Frequency Selection
8
7
6
5
Description
FRSEL
XOUT
VDD
FRSEL
SSCLK
M
0
1
Table
2.
Input Frequency Range
16.0 to 32.0 MHz
8.0 to 16.0 MHz
4.0 to 8.0 MHz
CY25811/12/14
Page 3 of 14
[+] Feedback