DSPIC33FJ64MC804-H/PT Microchip Technology, DSPIC33FJ64MC804-H/PT Datasheet - Page 134

• Manufacturer Part Number: DSPIC33FJ64MC804-H/PT
• Description: 16-bit DSC, 64KB Flash, Motor, CAN, DMA, 40 MIPS, NanoWatt 44 TQFP 10x10x1mm TRA
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64MC804-H/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 9x10b/12b, D/A 6x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 140°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
The DMA controller features eight identical data
transfer channels.
Each channel has its own set of control and status
registers. Each DMA channel can be configured to
copy data either from buffers stored in dual port DMA
RAM to peripheral SFRs, or from peripheral SFRs to
buffers in DMA RAM.
The DMA controller supports the following features:
• Eight DMA channels
• Register Indirect With Post-increment Addressing
• Register Indirect Without Post-increment
• Peripheral Indirect Addressing mode (peripheral
• CPU interrupt after half or full block transfer
FIGURE 8-1:
DS70291E-page 134
mode
Addressing mode
generates destination address)
complete
SRAM
Note:
SRAM X-Bus
CPU
CPU and DMA address buses are not shown for clarity.
TOP LEVEL SYSTEM ARCHITECTURE USING A DEDICATED TRANSACTION BUS
PORT 1
DMA RAM
CPU Peripheral DS Bus
Peripheral
Non-DMA
PORT 2
Ready
DMA DS Bus
DMA Controller
• Byte or word transfers
• Fixed priority channel arbitration
• Manual (software) or Automatic (peripheral DMA
• One-Shot or Auto-Repeat block transfer modes
• Ping-Pong mode (automatic switch between two
• DMA request for each channel can be selected
• Debug support features
For each DMA channel, a DMA interrupt request is
generated when a block transfer is complete.
Alternatively, an interrupt can be generated when half of
the block has been filled.
requests) transfer initiation
DPSRAM start addresses after each block
transfer complete)
from any supported interrupt source
Channels
DMA
Peripheral Indirect Address
Peripheral 1
CPU
Ready
DMA
© 2011 Microchip Technology Inc.
DMA
Peripheral 3
CPU
Ready
DMA
DMA
Peripheral 2
CPU
Ready
DMA
DMA