HBAT-5402-BLKG Avago Technologies US Inc., HBAT-5402-BLKG Datasheet
HBAT-5402-BLKG
Specifications of HBAT-5402-BLKG
HBAT-5402-BLKG
Available stocks
Related parts for HBAT-5402-BLKG
HBAT-5402-BLKG Summary of contents
Page 1
... Clipping/clamping diode Description Features Lower frequency, general purpose, Schottky Diode. Used primarily for clipping and clamping clamp applications, the low series resistance, low capacitance and fast switching time makes this an ideal choice. Rs=2.4 Ohms. Ct=3.0 pF. Vbr=30V. Vf=800mV @ IF=100mA > HBAT-5402 Lifecycle status: Active ...
Page 2
... High Performance Schottky Diode for Transient Suppression Data Sheet Description The HBAT-540x series of Schottky diodes, commonly referred to as clipping /clamping diodes, are optimal for circuit and waveshape preservation applications with high speed switching. Low series resistance, R them ideal for protecting sensitive circuit elements against high current transients carried on data lines ...
Page 3
... Storage Temperature STG θ Thermal Resistance, junction to lead JC Note: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. Linear and Non-linear SPICE Model 0. SPICE model Note effectively model the packaged HBAT-540x product, please refer to Application Note AN114. HBAT-540x DC Electrical Specifications, T Part Package Number Marking Lead [2] HBAT- Code Code Configuration Package -5400 0 V0 Single -540B ...
Page 4
Package Dimensions Outline SOT- XXX SYMBOL Notes: e2 XXX-package marking E Drawings are not to scale L Tape Dimensions and Product Orientation P ...
Page 5
... SOT-3 diodes. Note that the term “ ambient temperature” refers to the temperature of the diode’s leads, not the air around the circuit board. It can be seen that the HBAT- 540B and HBAT-540C products in the SOT-33 package will safely withstand a steady-state forward current of 330 mA when the diode’s terminals are maintained at 75°C. For pulsed currents and transient current spikes of less than one microsecond in duration, the junction does not have time to reach thermal steady state ...