97C04T Grayhill Inc, 97C04T Datasheet - Page 3

• Manufacturer Part Number: 97C04T
• Description: Slide Switch,STRAIGHT,SPST,ON-OFF,Number Of Positions:4,SURFACE MOUNT Terminal
• Manufacturer: Grayhill Inc
• Type: DIPr

Specifications of 97C04T

• Switch Function Configuration: ON OFF
• Pole Throw Configuration: SPST
• Total # Of Positions: 4
• Terminal Pitch (mm): 1.27mm
• Actuator Style: Recessed Slide
• Current Rating (max): 0.025A
• Voltage Rating (vdc): 24V
• Contact Material: Copper Alloy
• Contact Plating: Gold/Nickel
• Mechanical Life: 1000
• Seal: No
• Operating Temp Range: -40C to 85C
• Body Orientation: Straight
• Mounting Style: Surface Mount
• Termination Style: Gull Wing
• Application: For hand-held radios, industrial control products, CD-ROM drives
• Brand/series: 97C Series
• Capacitance: 5 pF (Max.)
• Contact Form: SPST
• Current, Rating: 25 mA
• Dielectric Strength: 300 VAC
• Mounting Type: PCB
• Number Of Poles: 1
• Number Of Positions: 4
• Resistance, Contact: 100 Milliohms (Max.)
• Resistance, Insulation: 100 Megohms (Min.) @ 100 VDC
• Temperature, Operating: -40 to +85 °C
• Termination: SMT
• Voltage, Rating: 24 VDC
• Lead Free Status / Rohs Status: Compliant

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: [phone] • Fax: [phone] • www.grayhill.com
ORDERING INFORMATION
SPECIFICATIONS
Electrical Ratings
Make-and-break Current Rating: 2,000
operations per switch position at these resistive
loads:10 mA, 30 Vdc; or 10 mA, 50 mVdc; 10
mA, 50 mVdc; or 25 mA, 24 Vdc; or 100 mA,6
Vdc.
Contact Resistance: (measured at 10 mA, 50
mVdc). Initial: 20 mohms maximum, After Life:
100 mohms maximum
Insulation Resistance: Minimum, at 100 Vdc
between adjacent closed contacts and also
across open switch contacts.
Initial (Mohms): 5,000, After Life (Mohms): 1,000
Dielectric Strength: Minimum voltage (AC RMS)
measured
contacts and also across open switch contacts.
lnitial: 500 volts, After Life: 500 volts
Current Carry Rating: 3A maximum rise of
20°C
Switch Capacitance: 2 pF at 1 megahertz
Mechanical Ratings
Where Grayhill performance is superior, the MIL
spec is listed in parentheses.
Mechanical Life: 2,000 operations per switch
position
Vibration Resistance: Per Method 204, Test
Condition B , 1mS opening (10 mS allowed)
Mechanical Shock: Per Method 213, Test
Condition A. 1mS opening (10 mS allowed)
Thermal Shock Resistance: Per specification;
no failures; passes contact resistance.
Terminal Strength: Per specification
Thermal Aging: 1,000 hours at 85°C; no failures.
Available from your local Grayhill Distributor.
For prices and discounts, contact a local Sales
Office, an authorized local Distributor or Grayhill.
90HBW02PRT
between
Positions
No. of
10
2
3
4
5
6
7
8
9
adjacent
Series
Terminal Style: W = Gull Wing, J = J-Bend
RoHS compliant
Packaging: R = Tape and reel packaging (750 switches/reel)
Seal: P = Polyimide Seal
Number of Positions: 02 through 10
Blank = No Seal
Length
Inches
1.070"
.270"
.370"
.470"
.570"
.670"
.770"
.870"
.970"
closed
Blank = Tube packaging (each tube is 19.5" long)
Environmental Ratings
Meets all requirements of MIL- S-83504.
Operating Temperature Range: -40°C to +
85°C
Storage Temperature Range: -40°C to + 85°C
Moisture Resistance: Per MIL-STD-202,
Method 106.
Soldering Information
Solderability: Per MIL-STD-202, Method 208
Soldering Heat Resistance: Per MIL-S-83504,
six second test.
Recommended Processing Temperature:
220°C–230°C (1 pass—260°C maximum)
Processing Position: Switch is to be processed
with all actuators in the closed (on) position as
shipped.
Fluxing: Per EIA RS-448-2 with flux touching
switch body.
Cleaning: Passes immersion test using water/
detergent. Acceptable solutions include 1-1-1
trichlorethane, freon, (TF, TE, or TMS), isopropyl
alcohol, detergent (140°F maximum). Terpene
acceptable for Series 90 only. Solutions which
are not recommended include acetone,
methylene chloride, freon TMC. High pressure
aqueous cleaning is not recommended.
11,9 mm
14,5 mm
17,0 mm
19,6 mm
22,1 mm
24,6 mm
27,2 mm
Length
Metric
6,9 mm
9,4 mm
Per Tube
Number
60
47
37
31
26
23
20
18
16
Surface Mount DIP Switches
Materials and Finishes
Shorting Member (Ball): Brass, gold-plate
over nickel barrier.
Base Contacts: Copper alloy, gold-plate
over nickel barrier.
Terminals: Copper alloy, matte tin plated over
nickel barrier.
Non-Conductive Parts: Thermoplastic (UL94V-
O)
Tape and Reel Packaging
Tape Seal Integrity: Passes gross leak test
using 125°C flourinert for 20 seconds minimum.
Reference MIL-STD-202, Method 112
Tape Seal: Polyimide film
TAPE AND REEL PACKAGING
Each reel has a 15.750 inch (390 mm)
minimum leader and a 6.30 inch (160
mm) minimum trailer.
EIA 481-2 or EIA 481-3
Meets requirements of
PIN ONE LOCATION
DIRECTION
OF FEED
16mm
16mm
13 INCH
DIAMETER REEL
CONDUCTIVE
PLASTIC EMBOSSED
TAPE
24mm
TAPE
32 &
44mm
TAPE
D I P
6