TL-N10ME2 Omron, TL-N10ME2 Datasheet - Page 10

• Manufacturer Part Number: TL-N10ME2
• Description: BLOCK PRX,10MM,NPN,NC,UNSH
• Manufacturer: Omron
• Series: TL-Nr

Specifications of TL-N10ME2

• Maximum Operating Temperature: + 70 C
• Operating Supply Voltage: 10 V to 30 V
• Sensing Distance: 10 mm
• Minimum Operating Temperature: - 25 C
• Features: NC
• Sensor Type: Inductive
• Sensing Object: Metallic
• Response Frequency: 500Hz
• Material - Body: ABS Resin
• Shielding: Unshielded
• Voltage - Supply: 10 V ~ 30 V
• Output Type: NPN-NC
• Terminal Type: 3-Wire
• Package / Case: Box
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Designing the Sensing Object for TL-G3D-3 Grooved
Model
For high-speed response to a toothed
metal plate, the sensing objects must be
at least the size of the standard sensing
object and there must be sufficient
distance between sensing objects.
The response frequency for a toothed
wheel like the one shown at the right is 1
kHz min. The response frequency will be
reduced if the wheel is smaller or the
width of the teeth or the distance
between the teeth is reduced.
● Mounting
When tightening the mounting screws, do not exceed the torque in the
following table.
Dimensions
Sensors
TL-Q2MC1
TL-Q5M@@
TL-Q2MC1
TL-Q5M@@
TL-N@M@@
TL-G3D-3
Model
0.9 to 1.5 N·m
0.59 N·m
*1. C Models: 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm
*2. C Models: Detection indicator (red)
Torque
2 N·m
D Models: 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm
D Models: Operation indicator (red), Setting indicator (green)
17
Sensing surface
8
Material: Iron
t = 0.5 mm
Insulator diameter: 1.2 mm), Standard length: 2 m
Insulator diameter: 1.3 mm), Standard length: 2 m
9
15 min.
17
3
* 2.9-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.15 mm
0.9 mm), Standard length: 2 m
10
min.
18.5±
16
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
32 max.
0.2
25
28
28
8
● Adjustment
Sensing Object Passing Position for the TL-G3D-3
Grooved Model
The gap between the sensing object and the bottom of the groove
must be 1 mm or less.
3.2-dia. mounting hole
Indicators *2
1
Detection indicator (red)
2.5
Two, 3.3 dia.
3.5
*
*1
2
, Insulator diameter:
10.5±
6
0.1
1 mm max.
TL-N/TL-Q/TL-G
2
2
Sensing object
,
,
Mounting Hole
Dimensions
Two, 3.3-dia. holes
10.5±
0.1
(Unit: mm)
10