MUR160RLG ON Semiconductor, MUR160RLG Datasheet - Page 7

• Manufacturer Part Number: MUR160RLG
• Description: DIODE ULTRA FAST 1A 600V DO-41
• Manufacturer: ON Semiconductor
• Series: SWITCHMODE™r

Specifications of MUR160RLG

• Voltage - Forward (vf) (max) @ If: 1.25V @ 1A
• Voltage - Dc Reverse (vr) (max): 600V
• Current - Average Rectified (io): 1A
• Current - Reverse Leakage @ Vr: 5µA @ 600V
• Diode Type: Standard
• Speed: Fast Recovery =< 500ns, > 200mA (Io)
• Reverse Recovery Time (trr): 75ns
• Mounting Type: Through Hole
• Package / Case: DO-204AL, DO-41, Axial
• Product: Ultra Fast Recovery Rectifier
• Configuration: Single
• Reverse Voltage: 600 V
• Forward Voltage Drop: 1.25 V
• Recovery Time: 75 ns
• Forward Continuous Current: 1 A @ Ta=120C
• Max Surge Current: 35 A
• Reverse Current Ir: 5 uA
• Mounting Style: Through Hole
• Maximum Operating Temperature: + 175 C
• Minimum Operating Temperature: - 65 C
• Repetitive Reverse Voltage Vrrm Max: 600V
• Forward Current If(av): 1A
• Forward Voltage Vf Max: 1.25V
• Reverse Recovery Time Trr Max: 75ns
• Forward Surge Current Ifsm Max: 35A
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Capacitance @ Vr, F: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MUR160RLGOS; MUR160RLGOS; MUR160RLGOSTR

PUBLICATION ORDERING INFORMATION
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
OPTIONAL AS NEEDED
POLARITY INDICATOR
(SEE STYLES)
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
K
F
D
F
B
A
K
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
http://onsemi.com
MUR120 Series
AXIAL LEAD
CASE 59−10
ISSUE U
7
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN F
Y14.5M, 1982.
JEDEC DO−41 OUTLINE SHALL APPLY
DIMENSION.
STYLE 1:
DIM
A
B
D
K
F
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
0.161
0.079
0.028
1.000
MIN
−−−
INCHES
0.205
0.106
0.034
0.050
MAX
−−−
MILLIMETERS
25.40
4.10
2.00
0.71
MIN
−−−
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MAX
5.20
2.70
0.86
1.27
−−−
MUR120/D