83123015 Crouzet USA, 83123015 Datasheet - Page 131

• Manufacturer Part Number: 83123015
• Description: SNAP SWITCH
• Manufacturer: Crouzet USA
• Type: Basicr

Specifications of 83123015

• Actuator Type: Plunger
• Brand/series: 83123 Series
• Contact Form: SPDT-NC/NO
• Current, Rating: 5 A
• Flammability Rating: UL 94V-0
• Force, Operating: 18.7 Oz.
• Ip Rating: IP66
• Mounting Hole Size: 0.125 "
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: Snap Action
• Temperature Rating: 0 to 85 °C
• Termination: Cable
• Voltage, Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Installation conditions
The presence of surrounding objects may affect capacitive proximity
detectors. These objects may reduce sensing capacity or may
themselves be detected. It is necessary to maintain a standard distance
between a capacitive proximity detector and the surrounding objects
when installing this type of detector.
Capacitive Proximity Detectors – Technical Guide
Order/Technical Support – Tel: [phone] / FAX: [phone] / www.crouzet-usa.com
>2D
>2D
>D
>D
Products and specifications subject to change without notice.
Effects of water droplets on the sensing face
The curves below illustrate the modifications to the operating range
which may be caused by the presence of water droplets on the sensing
face of a capacitive proximity detector. If the quantity of water droplets is
0.2 ml (approx. 2-3 drops), the operating range is extended by around
20 %; if the water droplets cover the entire sensing face, the operating
range is extended by more than 300 %.
Warning
The presence of frost, ice, moisture, oil or dust on the active surface will
prevent reliable operation.
The detection of liquids or powders attached to the walls of non-metallic
vessels will prevent reliable operation.
Connecting a DC capacitive proximity detector to a high-load current
(current higher than 200 mA) (for electric motors and electromagnetic
contacts) will cause the output transistor to malfunction. The detector
must be connected via a relay.
Water (ml)
Water (ml)
Water
Water
3/123
3