D4B-2115N-KGM1 Omron, D4B-2115N-KGM1 Datasheet

Page 1

... D4B-N Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications Snap-action contact for accurate switching H with safe operation via direct drive positive opening mechanism Two sets of contacts: one (NC) for safety H circuit and the other (NO) for control circuit ...

Page 2

... G1/2 (PF1/2) (3-conduit) Japanese type 7: 1/2-14NPT (3-conduit) North American type 2. Built-in Switch 1: 1NC/1NO (Snap-action) A: 2NC (Slow-action) 5: 1NC/1NO (Slow-action) (See Note) Note: Excluding D4B-jj81N and D4B-jj87N models. J SWITCHES (EN50041) Description Part number Actuator Conduit size/type PG13.5 (European) 1NC/1NO 1NC/1NO (Snap-action) (Slow-action) Side ...

Page 3

... The snap-action models with adjustable roller levers or adjustable rod levers are not approved under the Forced Opening Certificate (TÜV) of the EN standard. 2. The D4B- Limit Switch conforming to European standards, and PG13.5 is commonly used in Europe. 3. The wobble lever models are ordinary limit switches and are not approved under EN, GS, and SUVA’s Forced Opening Certificate ...

Page 4

... Destruction: 1,000 m/s min. 2 Malfunction:300 m/s min. Operating: --40°C to 80°C, with no icing (--25°C to 80°C for the flexible-rod type) Operating: 95% max. IP67 (EN60947-5-1) Approx. 250 g 5 D4B-N Volt-amperes Make Break 7,200 VA 720 VA Maximum make or break volt-amperes at 300 volts or less 300 volts or less 69 Slow-action 10,000,000 operations min ...

Page 5

... SNAP-ACTION MODELS (cosφ 10,000 Operating frequencies: 30 times/min., cosφ 5,000 125 VAC 3,000 250 VAC 480 VAC 1,000 500 300 100 Switching current (A) D4B-jj17N D4B-jj70N D4B-jj71N (see note 2) 2.12 N 18.63 N 0.29 N 1.96 N 2.0 mm max. 3.0 mm 5.0 mm 1 49. 35±1 mm 48± ...

Page 6

... Stroke 2. When contacts are being pulled apart. Safety cam directly pushes up the movable contact blade. 7 D4B-N Explanation Only NC contact 11-12 has an approved positive opening mechanism. ON Terminal numbers 11-12 and 13-14 cannot be used as unlike poles. Only NC contact 11-12 has an approved positive opening mechanism ...

Page 7

... Key for Part No. Code: Conduit type for standard switches 1: PG 13.5 (European 1/2 (Japanese) 3: 1/2-14NPT (North American) J SWITCHES Roller Lever D4B-jj11N 131.3±1.2 Fixed contact (NC) Conforms to IEC 947-5-1 Positive Opening Movable contact When metal deposition occurs, the contacts Plunger are separated from each other by the plunger being pushed in ...

Page 8

... Adjustable Roller Lever Switch, Rubber Roller D4B-3113N, D4B-3513N, D4B-3A13N R41-R89 (R1.61-R3.50) (2.36) (1.18) Adjustable Roller Lever D4B-jj16N Adjustable Rod Lever D4B-jj17N 68.3 ±1 (2.96) Two, 5.3 dia. (0.21) mounting holes (0.13) 71±1 64 dia resin roller 46.8 28 Allen- 23 head bolts Two, 5.3-dia. ...

Page 9

... Top Plunger D4B-jj70N 60±0.2 Top Roller Plunger D4B-jj71N 60±0.2 Coil Spring D4B-jj81N 18.2 dia. 203.5±1.2 29.1 60±0.2 8 Plastic Rod D4B-jj87N 61.5 18.2 dia. 203.5±1.2 29.1 60±0.2 16 Four, M3.5 x 24.5 PT 9.2 dia. head clamping screws Stainless steel plunger OP Two, 5.3-dia. ...

Page 10

... Switches Roller Lever D4B-jj11N Adjustable Roller Lever Switch, Rubber Roller D4B-7113N, D4B-7513N, D4B-7A13N R41-R89 (R1.61-R3.50) Six, 5.3 dia. (0.21) mounting holes (1.06) Adjustable Roller Lever D4B-jj16N 17.5 dia. x 6.6 resin roller Allen-head bolt Operating position indicator (see note Six, 5.3-dia. ...

Page 11

... D4B-N Adjustable Rod Lever D4B-jj17N Top Plunger D4B-jj70N Top Roller Plunger D4B-jj71N 3 dia. x 160 stainless steel rod 145 max. Operating position indicator (see note Allen-head bolts Six, 5.3-dia. mounting holes Four, M3 cover mounting screws Two, caps Cover Three, PG13.5 Note: 9.2 dia. ...

Page 12

... Six, 5.3-dia. mounting holes Four, M3 cover mounting screws Two, caps Cover Three, PG13.5 13 D4B-N (40) (see note) 6.6 dia. +0.15 Two -dia. holes (depth Note: Set the spring so that the dog comes in contact at a point 40 mm from the tip. ...

Page 13

... R31 hexagon clamping screws 15 11.5 D4B-000RN 19 dia resin roller 33.7 7.3 dia. M5 hexagon clamping 18 screws D4B-0002N 50 dia. rubber roller R33.7 D4B-0004N 34 24.2 50 dia. rubber roller 6 12.8 3.2 D4B-0006N 19 dia resin roller 17 12 Adjustable range (25 to 89) 97 D4B-0007N 17.8 3 dia. 12 145 max ...

Page 14

... D4B-jN application satisfying EN standards is to employ the D4BL, apply the 10 fuse approved by IEC269. Do not apply the D4B-jN to the door without applying a stopper to the door. If the D4B-jN is used with the actuator normally pressed, the D4B-jN may malfunction or may soon have reset failures ...

Page 15

... D4B-N J CORRECT USE Operating Environment The D4B-jN is for indoor use. The D4B-jN may malfunction if the D4B-jN is used outdoors. Be sure to use a model with a lever-type actuator for outdoor use instead. Do not use the D4B-jN in the following places: Places with radical temperature changes. • ...

Page 16

... Correct Top View Dog Dog When using a long lever model like the D4B-jj16N or D4B-jj17N, the Switch may telegraph. To avoid telegraphing, take the following precautions. 1. Set the lever to operate in one direction. (For details, see the data sheet section: CW, CCW or Two-way Operation.) 2. Modify the rear end of the dog to an angle of 15° ...