A22E-LP-11 Omron, A22E-LP-11 Datasheet - Page 12

• Manufacturer Part Number: A22E-LP-11
• Description: Non-lighted,push-pull,1NC
• Manufacturer: Omron
• Series: A22r
• Type: Emergency Stopr

Specifications of A22E-LP-11

• Circuit: DPST (1-NO, 1-NC)
• Switch Function: On-Off, Off-On
• Contact Rating @ Voltage: 10A @ 110VAC
• Actuator Type: Mushroom Button
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Contact Form: SPST - NC-NO
• Contact Rating: 10 Amps at 110 Volts
• Actuator: Round, Large
• Mounting Style: Through Hole
• Illumination: Not Illuminated
• Body Shape: Square
• Dielectric Strength: 2500 Volts
• Features: Easy mounting and removal of switch unit
• Insulation Resistance: 100 MOhms
• Mounting Angle: Straight
• Water / Moisture Rating: IP65
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A22ELP11

E-stop Shroud
A22Z-EG2, A22Z-EG21, A22Z-EG22
E-stop Shroud
A22Z-EG1, A22Z-EG1-W,A22Z-EG10,A22Z-EG10-W
Mounting with Spacers
Note: 1. The dimensions of the Shroud conform to the
* These are the dimension from the front of the panel when
Note: 1. The dimensions of the Shroud
Spacer
With 1 Spacer
the Switch Unit is attached.
13
10
2. The Shroud is not provided with the Switch.
3. Tighten to a torque of 1.96 to 2.94 N⋅m.
4. The allowable panel thicknesses are as follows:
2. The Shroud is not provided with
Panel
specifications of the SEMATECH Application
Guide for SEMI S2-93.
Without Spacers: t=1.3 to 22.5 mm
With 1 Spacer:
With 2 Spacers: t=1.3 to 2.5 mm
conform to the specifications of
the SEMATECH Application
Guide for SEMI S2-93.
the Switch.
With 2 Spacers
Spacers
23
20
t=1.3 to 12.5 mm
Panel
90 dia. 78 dia.
Panel Cutout Dimensions
105 dia.
98 dia.
79 dia.
33 dia.
95
+0.2
0
2.8
75
63
2.8
22.2 dia.
22.2 dia.
90.3
+0.4
20.6
5.5
0
75 min.
(Determined by the
height of the Switch
surface in the
lock position.)
20.5
dia.
+0.2
“EMERGENCY STOP” is indicated
on A22Z-EG1-W.
Legend plate is not provided with
A22Z-EG10 and A22Z-EG10-W.
0
Detents
(One on
each side)
inside
Position of
detent
notch
2R
2.5
3
30 40
+0.5
−1.5
The number of spacers depends
on the model
A22Z-EG2 : No Spacer
A22Z-EG21 : 1 Spacer
A22Z-EG22 : 2 Spacers
Mounting a 1-pole Switch Unit *
35
5R
Panel
12
38
8
88 max.
M90
Panel
52.2 max.
A22E-M
NC Contact Unit
Switch Unit
Position of
detent
notch
Panel Cutout Dimensions
Allowable panel thickness: 1 to 3 mm
24.2±
Mounting a 2-pole Switch Unit *
0.2
Panel
Sunken
section, 0.2
1.7R
105 max.
22.3
+0.1
0
Rubber packing (t=0.5)
DPST-NC One-piece
+0.4
0
EMERGENCY OFF
inscription plate (t=1)
Rubber packing (t=0.5)
Locking ring
Mounting panel
Contact Unit
A22E
Switch guard
12