CS1W-AD161 Omron, CS1W-AD161 Datasheet - Page 6

• Manufacturer Part Number: CS1W-AD161
• Description: CS1 16 Pt Analog Inp Conn Type
• Manufacturer: Omron

Specifications of CS1W-AD161

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

10
Progressively Easier Handling
New Functions for the LCB01/05 Unit Ver. 3.0
with CX-Process Tool Ver. 5.0
Unrestricted location
Function blocks can now be positioned anywhere on the
block diagram. And, up to 64 function blocks can be
placed on one diagram instead of the previous 18. This
makes programs easier to read than ever before.
Backup Tags, Comments,
and Connections Data
Tag settings, comments, annotations, and function block
connection data previously saved to Memory Cards can
now also be saved in the LCB. CS1 CPU Units support
simple backup functions using the Memory Card that
enable backup, recovery, and comparison of all PLC data
including function block data in the Loop Control Board.
Wireless debugging
(calibration setting)
Any desired PV can be set without using inputs from
field devices to enable checking operation with only a
computer and the PLC. No loads need to be connected
to verify programming or check operation in advance.
Even Easier to Use
Improved maintenance capabilities
Even Easier to Use
Improved maintenance capabilities
Supported by CS1W-LCB01/05 unit Ver. 3.0 or later.
Supported by CS1W-LCB01/05 unit Ver. 3.0 or later.
Supported by CS1W-LCB01/05 unit Ver. 3.0 or later.
Function block data
Simple Backup
Loop Control Board (LCB)
PV
CPU Unit
CX-Process Tool
Ver.5.0
Memory Card in CPU Unit
Virtual PV input using
wireless debugging
TAG001
PID
Saved to LCB
or Memory
Card.
Tag settings,
comments,
annotations,
and function
block
connection data
Utility Software
Engineering steps can be
drastically reduced by
combining a Loop Controller
with an NS-series
Programmable Terminal (PT).
Face Plate Auto-Builder for NS
Face Plate Auto-Builder for NS
Automatically Generate Control
and Tuning Windows The software
generates NS touch panel screen
data from tag information created
on the CX-Process Tool (tag
names, tag comments, scaling, I/O
allocations, etc.).
There is no need for troublesome
communications address settings
on the PT or ladder programming.
The generated data can be edited
on the CX-Designer (NS screen
creation software) as required.
CX-Process Tool
(function block programming
software)
Loop Controller programming
CSV tag file output
CS1 + LCB/LCU
NS-series PT
Face Plate Auto-Builder
for NS
CX-Designer
(NS screen creation software)
Created screens are
easily transferred to the
PT using a Memory Card
or network connection.
Editing of created data.
Creating other screens as
required.
11